The Electrolux ZUC4103DEL takes the Electrolux UltraCaptic Starter Kit (USK10) as its filter; replace it every 12 months; Australian sellers list it from A$42.00 as of 5 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your vacuum cleaner
Electrolux ZUC4103DEL
Barrel vacuum
Confirmed against Electrolux's listConfirmed against Electrolux Australia's compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the USK10 filter
UltraCaptic Starter Kit (USK10) · replace every 12 months · check the code printed on your old filter before ordering.
Your vacuum cleaner
Barrel vacuum
Confirmed against Electrolux's listConfirmed against Electrolux Australia's compatibility list
Takes the USK10
Filter · every 12 months · check the code on your old filter.
Other Electrolux vacuum cleaners that take the USK10
GenuineGenuine Electrolux
$42.00
Electrolux Au · 5 OctLowest genuine · Electrolux Au · checked 5 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Electrolux. Compatible: another brand. Check certification on the seller's page.Genuine is made by Electrolux. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest price · $42.00
Electrolux Au. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Electrolux Au in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Usually every 12 months.
After replacing: No reset.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point.
Not due yet?
Get a nudge when your filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the filter in your Electrolux ZUC4103DEL
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Unplug the vacuum and press the catches on the exhaust grille at the back of the canister.
- 2Lift the grille off and pull the old exhaust filter out of its frame.
- 3Fit the new filter the same way round and clip the grille back on.
- 4If the filter is washable, rinse it in cold water and dry it for 24 hours before refitting.
- 5Change the s-bag and motor filter from the kit at the same time.
Every number this part goes by
- Retail name:
- 900167093
- Retail name:
- USK10
Sellers list any of these; they are the same part.
About your Electrolux ZUC4103DEL
Electrolux vacuum cleaner, barrel vacuum — UltraCaptic. Its filter is the UltraCaptic Starter Kit (USK10), part USK10, changed every 12 months.
Where the model number is: The rating label is on the underside or the back of the main body; the bag or filter type is usually printed on the old part.
Fits these 4 Electrolux models
Electrolux4 models
Common questions
- Which filter fits the Electrolux ZUC4103DEL?
- The Electrolux ZUC4103DEL takes the Electrolux UltraCaptic Starter Kit (USK10) (part USK10). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Electrolux ZUC4103DEL?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the USK10 in Australia?
- We track 2 Australian sellers for the USK10; the lowest listed price when we last checked was A$42.00 at Electrolux Au. Prices are re-checked daily and dated on this page.
- How do I fit the USK10 in a Electrolux ZUC4103DEL?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter, and a full bag loses suction well before it looks full.
- How do I reset the reminder?
- No reset.
Something looks wrong with the ZUC4103DEL match? . Reports go to a person, not a bot.