FitMatch

The Kärcher FC 2-4 takes the Kärcher FC 2-4 multi-surface roller (part 2.863-329.0) as its roller; Australian sellers list it from A$27.90 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Kärcher FC 2-4

Your hard floor cleaner

Hard floor cleaner

Confirmed against Kärcher's list

Not yours? Change
2.863-329.0

Takes the 2.863-329.0

Roller · check the code on your old part.

Other Kärcher models and their rollers and filters

The 2.863-329.0 fits the FC 2-4 only. These Kärcher models take a different roller:

Genuine

$27.90

Kärcher Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Kärcher. Compatible: another brand.

Lowest price · $27.90

Kärcher Australia. Every seller we track is listed below. Some links earn us a commission.

Open Kärcher Australia

This hard floor cleaner also takes a battery

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Kärcher AustraliaGenuine · checked 28 Oct$27.90Open
Amazon AUGenuine · checked 28 Oct$41.93Open
Open cheapest seller · $27.90

Opens Kärcher Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it as needed: Kärcher gives no interval. It says to wash the rollers under running water or in a washing machine at up to 60 °C after each use, never with fabric softener or in a clothes dryer.

After replacing: No reset: the maker's manual describes no replacement reminder for this part.

How to change the roller in your Kärcher FC 2-4

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Bring the handle upright to switch the FC 2-4 off.
  2. 2Press the unlocking button for the side cover and take the cover off.
  3. 3Pull the old roller off the roller holder.
  4. 4Fit the new roller onto the holder all the way to the end stop, matching the colour code on the inside of the roller to the holder (purple to purple).
  5. 5Refit the side cover.
Every number this part goes by
Retail name:
2.863-329
Retail name:
2.863-329.0
Retail name:
28633290

Sellers list any of these; they are the same part.

About your FC 2-4

Kärcher vacuum cleaner, hard floor cleaner — FC. Its roller is the FC 2-4 multi-surface roller, part 2.863-329.0.

Other rollers the maker lists for this hard floor cleaner: Kärcher FC 2-4 stone roller. Stone roller for tiles, stone and grout lines; not for marble or terracotta.

Also in this hard floor cleaner: Kärcher Battery Power 4/25 (4 V, 2.5 Ah) for FC 2-4 and FC 4-4.

Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.

Fits this Kärcher model

Kärcher1 model

Common questions
Which roller fits the Kärcher FC 2-4?
The Kärcher FC 2-4 takes the Kärcher FC 2-4 multi-surface roller (part 2.863-329.0).
Where can I buy the 2.863-329.0 in Australia?
We track 2 Australian sellers for the 2.863-329.0; the lowest listed price when we last checked was A$27.90 at Kärcher Australia. Prices are re-checked daily and dated on this page.
How do I fit the 2.863-329.0 in a Kärcher FC 2-4?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or matted roller picks up less; on a floor cleaner it also leaves streaks and water behind.
Is there anything to reset afterwards?
No reset: the maker's manual describes no replacement reminder for this part.

Something looks wrong with the FC 2-4 match? . Reports go to a person, not a bot.