FitMatch

The Vax VX72 takes the Vax Power 7 Filter Pack (VCP7PTFLT2) as its filter; Australian sellers list it from A$24.00 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Vax VX72

Your vacuum cleaner

Barrel vacuum

Confirmed against Vax's list

VCP7PTFLT2

Takes the VCP7PTFLT2

Filter · check the code on your old filter.

Other Vax vacuum cleaners that take the VCP7PTFLT2

Genuine

$24.00

Bunnings · 26 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Vax. Compatible: another brand.

Lowest price · $24.00

Bunnings. Every seller we track is listed below. Some links earn us a commission.

Open Bunnings

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $24.00

Opens Bunnings in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it periodically, depending on how much you use the vacuum, Vax says; tap or rinse the pre-motor filter every time you empty the dirt container.

After replacing: No reset.

How to change the filter in your Vax VX72

Watch the guide or follow the steps.

Filters - Pre & Post Bagless Vacuum Cleaner · Vax Australia (official)
  1. 1Switch the vacuum off and unplug it, then press the release catch and lift the dirt container off.
  2. 2Open the dirt container lid and lift out the pre-motor filter; check the shroud underneath.
  3. 3Fit the new pre-motor filter, or wash the old one in water no hotter than 40°C and let it dry fully.
  4. 4Swap the HEPA post-motor filter for the new one from the pack. Never wash the post-motor filter; tap it clean between changes.
  5. 5Refit the lid and click the dirt container back onto the vacuum.
Every number this part goes by
Retail name:
Vax Power 7 filter pack
Retail name:
VCP7PTFLT
Retail name:
VCP7PTFLT2

Sellers list any of these; they are the same part.

About your VX72

Vax vacuum cleaner, barrel vacuum — Power 7 family. Its filter is the Power 7 Filter Pack (VCP7PTFLT2), part VCP7PTFLT2.

Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.

Fits these 7 Vax models
Common questions
Which filter fits the Vax VX72?
The Vax VX72 takes the Vax Power 7 Filter Pack (VCP7PTFLT2).
Where can I buy the VCP7PTFLT2 in Australia?
We track 1 Australian seller for the VCP7PTFLT2; the lowest listed price when we last checked was A$24.00 at Bunnings. Prices are re-checked daily and dated on this page.
How do I fit the VCP7PTFLT2 in a Vax VX72?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Suction drops and the vacuum may cut out on a blocked filter.
Is there anything to reset afterwards?
No reset.

Something looks wrong with the VX72 match? . Reports go to a person, not a bot.