The Omron HEM-7361T takes the Omron IntelliWrap cuff (22–42 cm) (part HEM-FL31) as its cuff; Australian sellers list it from A$49.95 as of 3 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your blood pressure monitor
Omron HEM-7361T
Upper arm blood pressure monitor
Confirmed against Omron's listConfirmed against Omron's own compatibility list
Not yours? Change
Takes the HEM-FL31 cuff
IntelliWrap cuff (22–42 cm) · check the code on your old part before ordering.
In the box: IntelliWrap cuff, for arms 22–42 cm.
Your blood pressure monitor
Upper arm blood pressure monitor
Confirmed against Omron's listConfirmed against Omron's own compatibility list
Takes the HEM-FL31
Cuff · check the code on your old part.
In the box: IntelliWrap cuff, for arms 22–42 cm.
Other Omron blood pressure monitors that take the HEM-FL31
GenuineGenuine Omron
$49.95
Paramedic Shop · 3 NovLowest genuine · Paramedic Shop · checked 3 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Omron. Compatible: another brand.Genuine is made by Omron. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $49.95
Paramedic Shop. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
This blood pressure monitor also takes an AC adapter
- Omron AC adapter (Australia and New Zealand)Open Paramedic Shop$37.95
Omron's AC adapter for Australia and New Zealand. The monitor runs on batteries without it. Separate from the cuff.
Compare 2 sellers
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Paramedic Shop in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when air leaks from it or it is worn, Omron says; its manuals rate a cuff's durable period at 5 years or 10,000 uses.
After replacing: No reset. Omron's manuals describe no cuff-replacement reminder.
How to change the cuff in your Omron HEM-7361T
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the monitor off. Hold the plastic air plug at the base of the tube and pull it out of the air jack; don't pull on the tube.
- 2Keep the old air plug. Omron says it can be fitted to the optional cuff.
- 3Push the new IntelliWrap cuff's air plug into the air jack firmly.
- 4Slide your bare arm through the cuff so the tube side sits 1–2 cm above the inside of your elbow, then tighten it.
- 5Check your arm is 22–42 cm around, the range Omron gives for the HEM-FL31.
Every number this part goes by
- Retail name:
- HEM-FL31
- Retail name:
- HEM-FL31-AP2
- Retail name:
- HEM-FL31-B
- Retail name:
- HEM-FL31-BAP
- Retail name:
- Intelli Wrap cuff
- Retail name:
- Omron IntelliWrap cuff
Sellers list any of these; they are the same part.
About your Omron HEM-7361T
Omron blood pressure monitor, upper arm blood pressure monitor — Elite. Its cuff is the IntelliWrap cuff (22–42 cm), part HEM-FL31.
Also in this blood pressure monitor: Omron AC adapter (Australia and New Zealand). Omron's AC adapter for Australia and New Zealand. The monitor runs on batteries without it.
Where the model number is: The model is on the label under or on the back of the monitor, and on the box (Omron HEM-7121, A&D UA-767F). Omron also prints a name such as Standard or EZ on the front. The cuff's own code and arm size are printed on the cuff.
Fits these 6 Omron models
HEM-7156T. IntelliWrap cuff HEM-FL31, for arms 22–42 cm.
The other 5 models. In the box: IntelliWrap cuff, for arms 22–42 cm.
Common questions
- Which cuff fits the Omron HEM-7361T?
- The Omron HEM-7361T takes the Omron IntelliWrap cuff (22–42 cm) (part HEM-FL31). In the box: IntelliWrap cuff, for arms 22–42 cm.
- Where can I buy the HEM-FL31 in Australia?
- We track 1 Australian seller for the HEM-FL31; the lowest listed price when we last checked was A$49.95 at Paramedic Shop. Prices are re-checked daily and dated on this page.
- How do I fit the HEM-FL31 in an Omron HEM-7361T?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A cuff that leaks air will not inflate properly, and the monitor may show an error instead of a reading.
- Is there anything to reset afterwards?
- No reset. Omron's manuals describe no cuff-replacement reminder.
Something looks wrong with the HEM-7361T match? . Reports go to a person, not a bot.