FitMatch

Omron blood pressure monitor cuffs

Which cuff each of the 23 Omron blood pressure monitors sold in Australia takes, and the arm size each cuff is for, with dated prices from 2 Australian sellers.

Showing 21 of 23 Omron models

Medium arm cuff (22–32 cm)takes HEM-CR24

Wide range soft cuff (22–42 cm)takes HEM-RML31

IntelliWrap cuff (22–42 cm)takes HEM-FL31

Loading more models…

How to change the cuff on your Omron monitor

Steps for the small arm cuff (17–22 cm) (HEM-CS24), the cuff 17 Omron models take.

No clear video for this cuff yet. The steps cover it.

  1. 1Turn the monitor off. Hold the plastic air plug at the base of the tube and pull it straight out of the air jack; don't pull on the tube.
  2. 2Keep the old air plug. Omron says it can be fitted to the new cuff if the new cuff needs it.
  3. 3Push the new cuff's air plug into the air jack firmly until it clicks.
  4. 4Put the cuff on your bare upper arm with the bottom edge 1–2 cm above the inside of the elbow and the air tube on the inside of the arm, in line with your middle finger. Wrap it firmly.
  5. 5Check your arm is within the range printed on the cuff: 17–22 cm for the HEM-CS24.

Different steps for wide range soft cuff (22–42 cm) · Different steps for AC adapter (Australia and New Zealand) · Different steps for medium arm cuff (22–32 cm) · Different steps for IntelliWrap cuff (22–42 cm)

After changing the cuff

No reset. Omron's manuals describe no cuff-replacement reminder.

Common questions

What happens if I don't change the cuff?
A cuff that leaks air will not inflate properly, and the monitor may show an error instead of a reading.
Is there anything to reset after changing the cuff on an Omron monitor?
No reset. Omron's manuals describe no cuff-replacement reminder.
All 23 Omron blood pressure monitors we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Omron. Fitment sources are recorded on every model page.