Elvie breast pump spare parts
Which valves, membranes and tubing each of the 3 Elvie breast pumps sold in Australia takes, with dated prices from 1 Australian seller, genuine and compatible side by side.
Showing 3 of 3 Elvie models · grouped by part
Pump spout and valve kit (2-pack)takes EP01-PUA-FV02-B
Stride valves (3-pack)takes EB01-VLV03
Stride 2 valves (3-pack)takes EB01-VLV23
How to change the valves on your Elvie breast pump
Steps for the Stride connect kit (double) (EB01-CON02), the tubing 1 Elvie model takes.
- 1Pull the old tubes off the cups, the splitter and the hub connector.
- 2Check the new tubes are clean and completely dry.
- 3Push the hub connector firmly into the hub and fit the long tube and splitter.
- 4Push a short tube onto each cup cap, or cap off one side for single pumping.
Different steps for Stride diaphragms (2-pack) · Different steps for Stride 2 valves (3-pack) · Different steps for Pump seals (2-pack) · Different steps for Pump spout and valve kit (2-pack) · Different steps for Stride valves (3-pack)
After fitting new parts
No reset: the pump has no reminder for this part, so set your own.
Common questions
- What happens if I don't change the tubing?
- A stretched or torn valve or membrane lets the suction drop, so each session takes longer.
- Does Elvie make a compatible valve?
- Elvie makes the genuine valve. Compatible valves for Elvie models are made by other companies to fit the same models, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side.
- Is there anything to do after fitting new parts on an Elvie breast pump?
- No reset: the pump has no reminder for this part, so set your own.
All 3 Elvie breast pumps we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Elvie. Fitment sources are recorded on every model page.