FitMatch

Medela breast pump spare parts

Which valves, membranes and tubing each of the 14 Medela breast pumps sold in Australia takes, with dated prices from 2 Australian sellers, genuine and compatible side by side.

Showing 14 of 14 Medela models

PersonalFit Flex connector with membrane (2-pack)takes 101041898

Hands-free membrane (2-pack)takes 101045062

Valve and membrane pack (2 valves, 6 membranes)takes 800.0727

Magic InBra valve (2-pack)takes 101046700

Motion InBra membrane (2-pack)takes 101047600

How to change the valves on your Medela breast pump

Steps for the PersonalFit Flex connector with membrane (2-pack) (101041898), the valve 6 Medela models take.

How to assemble Medela's range of Flex™ breast pumps · medelaau (official)
  1. 1Wash your hands with soap and water and dry them on a clean towel.
  2. 2Take the connector off the bottle and breast shield, squeeze both flaps and swing the lid up, then lift out the old yellow membrane.
  3. 3Wash and sanitise the new connectors and membranes before you use them for the first time.
  4. 4Push the yellow membrane, flap first, into the opening of the connector body so it seals all the way round the edge, then close the lid until it clicks.
  5. 5Screw the connector onto the bottle, push the breast shield in and plug the short end of the tubing into the connector.

Different steps for Hands-free membrane (2-pack) · Different steps for Hands-free tubing · Different steps for valve and membrane pack (2 valves, 6 membranes) · Different steps for tubing for Swing Maxi and Freestyle Flex · Different steps for Harmony diaphragm (membrane) · Different steps for Swing Flex tubing · Different steps for Swing Maxi Flex tubing · Different steps for Swing PVC tubing · Different steps for Solo tubing · Different steps for Magic InBra membrane (2-pack) · Different steps for Magic InBra valve (2-pack) · Different steps for Solo Hands-free tubing · Different steps for Motion InBra membrane (2-pack) · Different steps for Magic InBra shield valve (2-pack)

After fitting new parts

No reset: the pump has no reminder for this part, so set your own.

Common questions

What happens if I don't change the valve?
A stretched or torn valve or membrane lets the suction drop, so each session takes longer.
Does Medela make a compatible valve?
Medela makes the genuine valve. Compatible valves for Medela models are made by other companies to fit the same models, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side.
Is there anything to do after fitting new parts on a Medela breast pump?
No reset: the pump has no reminder for this part, so set your own.
All 14 Medela breast pumps we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Medela. Fitment sources are recorded on every model page.