FitMatch
STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar)

Chainsaw chain

STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar)

3670 000 0056

Fits 16 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$40.00

STIHL Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by STIHL. Compatible: another brand.

Lowest price · $40.00

STIHL Australia. Every seller we track is listed below. Some links earn us a commission.

Open STIHL Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

STIHL AustraliaGenuine · checked 28 Oct$40.00Open
Open cheapest seller · $40.00

Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the 3670 000 0056 chain

Watch the guide or follow the steps.

STIHL MSA 120 chainsaw: Mounting the bar and chain, tensioning the saw chain · STIHL Australia (official)
  1. 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
  2. 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
  3. 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
  4. 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
  5. 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
  6. 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
Retail name:
3670 000 0056
Retail name:
3670-000-0056
Retail name:
36700000056
Retail name:
71 PM3 56
Retail name:
71PM3 56

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 16 STIHL models

HT 56 C-E. STIHL Australia sells the HT 56 C-E with a 25 cm 1/4" P bar and 71 PM3 chain: 56 drive links. STIHL lists 64 for a 30 cm 1/4" P bar and 44 (61 PMM3) for a 30 cm 3/8" P bar.

HTA 50. STIHL Australia sells the HTA 50 with a 25 cm bar: 56 drive links. STIHL lists 64 for a 30 cm bar.

The other 14 models. With a 25 cm (10") bar: 56 drive links.

Common questions
What does the 3670 000 0056 fit?
The STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar) fits 16 STIHL models, including the HT 56 C-E, HTA 50 and HT 135. Every one is listed on this page.
Where can I buy the 3670 000 0056 in Australia?
We track 1 Australian seller for the 3670 000 0056; the lowest listed price when we last checked was A$40.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
How do I fit the 3670 000 0056?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the 3670 000 0056 match? . Reports go to a person, not a bot.