The STIHL MSA 160 T takes the STIHL 71 PM3 saw chain 3670 000 0064 (64 drive links, 30 cm bar) as its chain; Australian sellers list it from A$46.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your chainsaw
STIHL MSA 160 T
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Not yours? Change
Takes the 3670 000 0064 chain
71 PM3 saw chain 3670 000 0064 (64 drive links, 30 cm bar) · check the code on your old part before ordering.
Takes 3670 000 0064 (64 drive links) on a 30 cm bar; 3670 000 0056 (56) on 25 cm.
Your chainsaw
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Takes the 3670 000 0064
Chain · check the code on your old part.
Takes 3670 000 0064 (64 drive links) on a 30 cm bar; 3670 000 0056 (56) on 25 cm.
Other STIHL chainsaws that take the 3670 000 0064
GenuineGenuine STIHL
$46.00
STIHL Australia · 28 OctLowest genuine · STIHL Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by STIHL. Compatible: another brand.Genuine is made by STIHL. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $46.00
STIHL Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.
After replacing: No reset needed. Check the chain tension often while a new chain beds in.
How to change the chain in your STIHL MSA 160 T
Watch the guide or follow the steps.
- 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
- 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
- 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
- 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
- 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
- 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
- Retail name:
- 3670 000 0064
- Retail name:
- 3670-000-0064
- Retail name:
- 36700000064
- Retail name:
- 71 PM3 64
- Retail name:
- 71PM3 64
Sellers list any of these; they are the same part.
About your STIHL MSA 160 T
STIHL chainsaw — Battery top-handle chainsaws (AP system). Its chain is the 71 PM3 saw chain 3670 000 0064 (64 drive links, 30 cm bar), part 3670 000 0064.
Other chains the maker lists for this chainsaw: STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar). With a 25 cm (10") bar: 56 drive links.
Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.
Fits these 16 STIHL models
STIHL16 models
MS 151 TC-E, MSA 160 C-B. Takes 3670 000 0064 (64 drive links) on a 30 cm bar; 3670 000 0056 (56) on 25 cm; 3670 000 0072 (72) on 35 cm.
HT 56 C-E, HTA 50, MSA 200 C-B, MSA 80 C-B. With a 30 cm (12") bar: 64 drive links.
The other 10 models. Takes 3670 000 0064 (64 drive links) on a 30 cm bar; 3670 000 0056 (56) on 25 cm.
Common questions
- Which chain fits the STIHL MSA 160 T?
- The STIHL MSA 160 T takes the STIHL 71 PM3 saw chain 3670 000 0064 (64 drive links, 30 cm bar). Takes 3670 000 0064 (64 drive links) on a 30 cm bar; 3670 000 0056 (56) on 25 cm.
- Where can I buy the 3670 000 0064 in Australia?
- We track 1 Australian seller for the 3670 000 0064; the lowest listed price when we last checked was A$46.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 3670 000 0064 in a STIHL MSA 160 T?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension often while a new chain beds in.
Something looks wrong with the MSA 160 T match? . Reports go to a person, not a bot.