The STIHL HT 56 C-E takes the STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar) as its chain; Australian sellers list it from A$40.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your chainsaw
STIHL HT 56 C-E
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Not yours? Change
Takes the 3670 000 0056 chain
71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar) · check the code on your old part before ordering.
STIHL Australia sells the HT 56 C-E with a 25 cm 1/4" P bar and 71 PM3 chain: 56 drive links. STIHL lists 64 for a 30 cm 1/4" P bar and 44 (61 PMM3) for a 30 cm 3/8" P bar.
Your chainsaw
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Takes the 3670 000 0056
Chain · check the code on your old part.
STIHL Australia sells the HT 56 C-E with a 25 cm 1/4" P bar and 71 PM3 chain: 56 drive links. STIHL lists 64 for a 30 cm 1/4" P bar and 44 (61 PMM3) for a 30 cm 3/8" P bar.
Other STIHL chainsaws that take the 3670 000 0056
GenuineGenuine STIHL
$40.00
STIHL Australia · 28 OctLowest genuine · STIHL Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by STIHL. Compatible: another brand.Genuine is made by STIHL. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $40.00
STIHL Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this chainsaw takes
- STIHL Service Kit 26 for FS 70, HT 56 and KM 56 (4144 007 4100)Open Premier Outdoor Power Equipment$24.00
The service kit. STIHL UK lists Service Kit 26 for the HT 56 (with the FS 70 and KM 56); STIHL Australia's catalogue lists the same kit, 4144 007 4100, for the FS 70 and KM 56. Separate from the chain. Reduces dust and debris drawn into the engine with the intake air (air filter).
- NGK CMR6H spark plugOpen Power Mowers$8.80
The spark plug. STIHL names NGK CMR 6 H; gap 0.5 mm. Separate from the chain.
Compare 3 sellers
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.
After replacing: No reset needed. Check the chain tension often while a new chain beds in.
How to change the chain in your STIHL HT 56 C-E
Watch the guide or follow the steps.
- 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
- 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
- 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
- 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
- 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
- 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
- Retail name:
- 3670 000 0056
- Retail name:
- 3670-000-0056
- Retail name:
- 36700000056
- Retail name:
- 71 PM3 56
- Retail name:
- 71PM3 56
Sellers list any of these; they are the same part.
About your STIHL HT 56 C-E
STIHL chainsaw — Pole pruners. Its chain is the 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar), part 3670 000 0056.
Other chains the maker lists for this chainsaw:
- STIHL 61 PMM3 saw chain 3610 000 0044 (44 drive links, 30 cm bar). With a 30 cm (12") 3/8" P bar: 61 PMM3, 44 drive links.
- STIHL 71 PM3 saw chain 3670 000 0064 (64 drive links, 30 cm bar). With a 30 cm (12") bar: 64 drive links.
Also in this chainsaw:
- STIHL Service Kit 26 for FS 70, HT 56 and KM 56 (4144 007 4100). STIHL UK lists Service Kit 26 for the HT 56 (with the FS 70 and KM 56); STIHL Australia's catalogue lists the same kit, 4144 007 4100, for the FS 70 and KM 56.
- NGK CMR6H spark plug. STIHL names NGK CMR 6 H; gap 0.5 mm.
Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.
Fits these 16 STIHL models
STIHL16 models
HT 56 C-E. STIHL Australia sells the HT 56 C-E with a 25 cm 1/4" P bar and 71 PM3 chain: 56 drive links. STIHL lists 64 for a 30 cm 1/4" P bar and 44 (61 PMM3) for a 30 cm 3/8" P bar.
HTA 50. STIHL Australia sells the HTA 50 with a 25 cm bar: 56 drive links. STIHL lists 64 for a 30 cm bar.
The other 14 models. With a 25 cm (10") bar: 56 drive links.
Common questions
- Which chain fits the STIHL HT 56 C-E?
- The STIHL HT 56 C-E takes the STIHL 71 PM3 saw chain 3670 000 0056 (56 drive links, 25 cm bar). STIHL Australia sells the HT 56 C-E with a 25 cm 1/4" P bar and 71 PM3 chain: 56 drive links. STIHL lists 64 for a 30 cm 1/4" P bar and 44 (61 PMM3) for a 30 cm 3/8" P bar.
- Where can I buy the 3670 000 0056 in Australia?
- We track 1 Australian seller for the 3670 000 0056; the lowest listed price when we last checked was A$40.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 3670 000 0056 in a STIHL HT 56 C-E?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension often while a new chain beds in.
Something looks wrong with the HT 56 C-E match? . Reports go to a person, not a bot.