FitMatch

The STIHL MS 881 takes the STIHL 46 RS saw chain 3946 000 0080 (80 drive links, 63 cm bar) as its chain; Australian sellers list it from A$67.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

STIHL MS 881

Your chainsaw

Chainsaw

Confirmed against STIHL's list

3946 000 0080

Takes the 3946 000 0080

Chain · check the code on your old part.

STIHL Australia sells the MS 881 with 63, 80 or 90 cm .404" bars. STIHL lists 80 drive links for 63 cm, 91 for 75 cm, and 104 or 108 for 90 cm depending on the bar; STIHL gives no figure for 80 cm, so count the links on your old chain.

Other STIHL chainsaws and their chains and parts

The 3946 000 0080 fits the MS 881 only. These STIHL models take a different chain:

Genuine

$67.00

STIHL Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by STIHL. Compatible: another brand.

Lowest price · $67.00

STIHL Australia. Every seller we track is listed below. Some links earn us a commission.

Open STIHL Australia

Other parts this chainsaw takes

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $67.00

Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the chain in your STIHL MS 881

Watch the guide or follow the steps.

How To Replace Your STIHL Chainsaw Chain | Chainsaw Maintenance | STIHL Chainsaw | STIHL GB · STIHL GB (official)
  1. 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
  2. 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
  3. 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
  4. 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
  5. 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
  6. 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
Retail name:
3946 000 0080
Retail name:
3946-000-0080
Retail name:
39460000080
Retail name:
46 RS 80
Retail name:
46RS 80

Sellers list any of these; they are the same part.

About your MS 881

STIHL chainsaw — Professional chainsaws. Its chain is the 46 RS saw chain 3946 000 0080 (80 drive links, 63 cm bar), part 3946 000 0080.

Other chains the maker lists for this chainsaw:

Also in this chainsaw:

Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.

Fits this STIHL model

STIHL1 model

STIHL Australia sells the MS 881 with 63, 80 or 90 cm .404" bars. STIHL lists 80 drive links for 63 cm, 91 for 75 cm, and 104 or 108 for 90 cm depending on the bar; STIHL gives no figure for 80 cm, so count the links on your old chain.

Common questions
Which chain fits the STIHL MS 881?
The STIHL MS 881 takes the STIHL 46 RS saw chain 3946 000 0080 (80 drive links, 63 cm bar). STIHL Australia sells the MS 881 with 63, 80 or 90 cm .404" bars. STIHL lists 80 drive links for 63 cm, 91 for 75 cm, and 104 or 108 for 90 cm depending on the bar; STIHL gives no figure for 80 cm, so count the links on your old chain.
Where can I buy the 3946 000 0080 in Australia?
We track 1 Australian seller for the 3946 000 0080; the lowest listed price when we last checked was A$67.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
How do I fit the 3946 000 0080 in a STIHL MS 881?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the MS 881 match? . Reports go to a person, not a bot.