FitMatch
Baratza Steel Flat Burrs, 54 mm (pair)

Grinder burr

Baratza Steel Flat Burrs, 54 mm (pair)

SP0100779

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$106.43

Baratza Australia · 1 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Baratza. Compatible: another brand.

Lowest price · $106.43

Baratza Australia. Every seller we track is listed below. Some links earn us a commission.

Open Baratza Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Baratza AustraliaGenuine · checked 1 Nov$106.43Open
Open cheapest seller · $106.43

Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it after around 10 years of standard home use, Baratza says.

After replacing: No reset: the grinder has no reminder for the burrs. Recalibrate the burrs after fitting new ones, as the manual describes.

How to change the SP0100779 grinder burr

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Run out the beans, unplug the grinder, then turn the hopper anticlockwise and lift it off.
  2. 2Fit the burr removal tool onto the wings of the upper burr carrier and turn it clockwise to unscrew the carrier, then lift it out.
  3. 3Undo the screws holding the burr in the upper carrier with a small flat-head screwdriver and fit the new burr. Do not overtighten the screws.
  4. 4To change the lower burr, undo its screws in the grind chamber and lift it out; Baratza advises leaving the lower burr carrier in place.
  5. 5Set the upper carrier level on the grind chamber, screw it back in, refit the hopper and calibrate the burrs as the manual shows.
Every number this part goes by
Retail name:
8170
Retail name:
Baratza 54mm steel burrs
Retail name:
Baratza 8170
Retail name:
Baratza Forte steel burrs
Retail name:
Baratza Vario steel burrs
Retail name:
SP0100779
Retail name:
Steel Flat Burrs - Pair

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 2 Baratza models

Baratza2 models

Matched by size and material: this grinder has 54 mm flat steel burrs, like this pair. Baratza's parts page does not name the grinder, so check before you order.

Common questions
What does the SP0100779 fit?
The Baratza Steel Flat Burrs, 54 mm (pair) (part SP0100779) fits the Baratza Forté BG and Vario W+.
Where can I buy the SP0100779 in Australia?
We track 1 Australian seller for the SP0100779; the lowest listed price when we last checked was A$106.43 at Baratza Australia. Prices are re-checked daily and dated on this page.
How do I fit the SP0100779?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
Is there anything to reset afterwards?
No reset: the grinder has no reminder for the burrs. Recalibrate the burrs after fitting new ones, as the manual describes.

Something looks wrong with the SP0100779 match? . Reports go to a person, not a bot.