The Baratza Vario W+ takes the Baratza Steel Flat Burrs, 54 mm (pair) (part SP0100779) as its burr; Australian sellers list it from A$106.43 as of 1 November 2026. This fit is not yet confirmed against the manufacturer's list.
Your grinder
Baratza Vario W+
Coffee grinder
Not confirmed by Baratza — check your old partNot yet confirmed by Baratza's own list — check the code on your old part
Not yours? Change
Takes the SP0100779 burr
Steel Flat Burrs, 54 mm (pair) · check the code on your old part before ordering.
Matched by size and material: this grinder has 54 mm flat steel burrs, like this pair. Baratza's parts page does not name the grinder, so check before you order.
Your grinder
Coffee grinder
Not confirmed by Baratza — check your old partNot yet confirmed by Baratza's own list — check the code on your old part
Takes the SP0100779
Burr · check the code on your old part.
Matched by size and material: this grinder has 54 mm flat steel burrs, like this pair. Baratza's parts page does not name the grinder, so check before you order.
Other Baratza grinders that take the SP0100779
GenuineGenuine Baratza
$106.43
Baratza Australia · 1 NovLowest genuine · Baratza Australia · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Baratza. Compatible: another brand.Genuine is made by Baratza. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $106.43
Baratza Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it after around 10 years of standard home use, Baratza says.
After replacing: No reset: the grinder has no reminder for the burrs. Recalibrate the burrs after fitting new ones, as the manual describes.
How to change the burr in your Baratza Vario W+
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Run out the beans, unplug the grinder, then turn the hopper anticlockwise and lift it off.
- 2Fit the burr removal tool onto the wings of the upper burr carrier and turn it clockwise to unscrew the carrier, then lift it out.
- 3Undo the screws holding the burr in the upper carrier with a small flat-head screwdriver and fit the new burr. Do not overtighten the screws.
- 4To change the lower burr, undo its screws in the grind chamber and lift it out; Baratza advises leaving the lower burr carrier in place.
- 5Set the upper carrier level on the grind chamber, screw it back in, refit the hopper and calibrate the burrs as the manual shows.
Every number this part goes by
- Retail name:
- 8170
- Retail name:
- Baratza 54mm steel burrs
- Retail name:
- Baratza 8170
- Retail name:
- Baratza Forte steel burrs
- Retail name:
- Baratza Vario steel burrs
- Retail name:
- SP0100779
- Retail name:
- Steel Flat Burrs - Pair
Sellers list any of these; they are the same part.
About your Baratza Vario W+
Baratza coffee grinder — Vario. Its burr is the Steel Flat Burrs, 54 mm (pair), part SP0100779.
Where the model number is: The model number is usually on a sticker on the underside or back of the machine.
Fits these 2 Baratza models
Common questions
- Which burr fits the Baratza Vario W+?
- The Baratza Vario W+ takes the Baratza Steel Flat Burrs, 54 mm (pair) (part SP0100779). Matched by size and material: this grinder has 54 mm flat steel burrs, like this pair. Baratza's parts page does not name the grinder, so check before you order.
- Where can I buy the SP0100779 in Australia?
- We track 1 Australian seller for the SP0100779; the lowest listed price when we last checked was A$106.43 at Baratza Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SP0100779 in a Baratza Vario W+?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
- Is there anything to reset afterwards?
- No reset: the grinder has no reminder for the burrs. Recalibrate the burrs after fitting new ones, as the manual describes.
Something looks wrong with the Vario W+ match? . Reports go to a person, not a bot.