What happens if I don't change it?

Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.

Grinder burr

Baratza Sette S1 Cone Burr and Holder Assembly

SP0100789

Fits 3 models

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Baratza

$36.92

Baratza Australia · 1 NovLowest genuine · Baratza Australia · checked 1 Nov

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Baratza. Compatible: another brand.Genuine is made by Baratza. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Lowest price · $36.92

Baratza Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Baratza Australia · $36.92

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Baratza

1 seller

Baratza AustraliaGenuine · checked 1 NovGenuine part · Lowest genuinechecked 1 Nov$36.92OpenGo to seller

Open cheapest seller · $36.92

Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is worn or damaged; Baratza says the Sette's conical burrs stay sharp for many years.

After replacing: No reset: the grinder has no reminder for the burrs.

How to change the SP0100789 grinder burr

Watch the guide or follow the steps.

Sette Shimming and Cone Burr Removal · Baratza (official)

1Swing the portafilter hook aside, close the bean shut-off and press START to run out the beans, then unplug the grinder.
2Turn the grind adjustment assembly past the coarsest setting to the blue install/remove mark; it drops down and out.
3Pull the cone burr and holder away from the adjustment assembly, and move the exit chute across to the new holder.
4Set the new holder on the bench burr-side down and press the adjustment assembly firmly onto it.
5Line up the blue marks, press up and turn the holder until it slides up into the grinder, then turn the assembly until it clicks onto the 1-31 scale.

Every number this part goes byBaratza S068 · S068 · Sette S1 burr holder · SP0100789

Retail name:: Baratza S068
Retail name:: S068
Retail name:: Sette S1 burr holder
Retail name:: SP0100789

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits these 3 Baratza modelsSette 270, Sette 270Wi, Sette 30

Baratza3 models

The S1 cone burr ready-fitted in its holder, the part that drops out from under the grinder.

Common questionsWhat does the SP0100789 fit? · Where can I buy the SP0100789 in Australia? · How do I fit the SP0100789?

What does the SP0100789 fit?: The Baratza Sette S1 Cone Burr and Holder Assembly (part SP0100789) fits the Baratza Sette 270, Sette 270Wi and Sette 30.
Where can I buy the SP0100789 in Australia?: We track 1 Australian seller for the SP0100789; the lowest listed price when we last checked was A$36.92 at Baratza Australia. Prices are re-checked daily and dated on this page.
How do I fit the SP0100789?: No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
Is there anything to reset afterwards?: No reset: the grinder has no reminder for the burrs.

Something looks wrong with the SP0100789 match? . Reports go to a person, not a bot.