FitMatch

The Baratza Sette 270Wi takes the Baratza Sette S1 Cone Burr and Holder Assembly (part SP0100789) as its burr; Australian sellers list it from A$36.92 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.

Baratza Sette 270Wi

Your grinder

Coffee grinder

Confirmed against Baratza's list

Not yours? Change
SP0100789

Takes the SP0100789

Burr · check the code on your old part.

The S1 cone burr ready-fitted in its holder, the part that drops out from under the grinder.

Other Baratza grinders that take the SP0100789

Genuine

$36.92

Baratza Australia · 1 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Baratza. Compatible: another brand.

Lowest price · $36.92

Baratza Australia. Every seller we track is listed below. Some links earn us a commission.

Open Baratza Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Baratza AustraliaGenuine · checked 1 Nov$36.92Open
Open cheapest seller · $36.92

Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is worn or damaged; Baratza says the Sette's conical burrs stay sharp for many years.

After replacing: No reset: the grinder has no reminder for the burrs.

How to change the burr in your Baratza Sette 270Wi

Watch the guide or follow the steps.

Sette Shimming and Cone Burr Removal · Baratza (official)
  1. 1Swing the portafilter hook aside, close the bean shut-off and press START to run out the beans, then unplug the grinder.
  2. 2Turn the grind adjustment assembly past the coarsest setting to the blue install/remove mark; it drops down and out.
  3. 3Pull the cone burr and holder away from the adjustment assembly, and move the exit chute across to the new holder.
  4. 4Set the new holder on the bench burr-side down and press the adjustment assembly firmly onto it.
  5. 5Line up the blue marks, press up and turn the holder until it slides up into the grinder, then turn the assembly until it clicks onto the 1-31 scale.
Every number this part goes by
Retail name:
Baratza S068
Retail name:
S068
Retail name:
Sette S1 burr holder
Retail name:
SP0100789

Sellers list any of these; they are the same part.

About your Sette 270Wi

Baratza coffee grinder — Sette. Its burr is the Sette S1 Cone Burr and Holder Assembly, part SP0100789.

Other burrs the maker lists for this grinder: Baratza Sette S1 Cone Burr. The S1 cone burr on its own; fitting it means unbolting the old burr from its holder with the 5 mm hex key.

Where the model number is: The model number is usually on a sticker on the underside or back of the machine.

Fits these 3 Baratza models

The S1 cone burr ready-fitted in its holder, the part that drops out from under the grinder.

Common questions
Which burr fits the Baratza Sette 270Wi?
The Baratza Sette 270Wi takes the Baratza Sette S1 Cone Burr and Holder Assembly (part SP0100789). The S1 cone burr ready-fitted in its holder, the part that drops out from under the grinder.
Where can I buy the SP0100789 in Australia?
We track 1 Australian seller for the SP0100789; the lowest listed price when we last checked was A$36.92 at Baratza Australia. Prices are re-checked daily and dated on this page.
How do I fit the SP0100789 in a Baratza Sette 270Wi?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
Is there anything to reset afterwards?
No reset: the grinder has no reminder for the burrs.

Something looks wrong with the Sette 270Wi match? . Reports go to a person, not a bot.