Grinder burr
Baratza M2 Conical Burr, Threaded (Virtuoso+)
SP0101069
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Baratza
$49.70
Baratza Australia · 1 NovLowest genuine · Baratza Australia · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Baratza. Compatible: another brand.Genuine is made by Baratza. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $49.70
Baratza Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or damaged; Baratza gives no set interval.
After replacing: No reset: the grinder has no reminder for the burrs.
How to change the SP0101069 grinder burr
Watch the guide or follow the steps.
- 1Unplug the grinder and take off the case as Baratza's case removal guide shows.
- 2Lift the safety switch off its posts, undo the three screws holding the gearbox and motor, lift them out and unplug the motor cable.
- 3Undo the four motor plate screws and the gear nut (a 10 mm nut is reverse-threaded: turn it clockwise), then push the drive shaft out, catching the cone burr. Keep the washers in order.
- 4Hold the old burr in pliers or a vice and undo the reverse-threaded drive shaft with a 9 mm or 11/32 in box wrench.
- 5Screw the new burr on by hand (reverse thread, no tools), refit the paddle wheel with its pegs in the burr, and put everything back in reverse order.
Every number this part goes by
- Retail name:
- 6175
- Retail name:
- Baratza 6175
- Retail name:
- Baratza Virtuoso+ cone burr
- Retail name:
- M2 Cone Burr
- Retail name:
- M2 Conical Burr - Threaded
- Retail name:
- SP0101069
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Baratza model
Baratza1 model
The cone (lower) burr. The Virtuoso+ comes with this M2 burr; changing it means taking the case and gearbox apart, about 20 minutes.
Common questions
- What does the SP0101069 fit?
- The Baratza M2 Conical Burr, Threaded (Virtuoso+) (part SP0101069) fits the Baratza Virtuoso+.
- Where can I buy the SP0101069 in Australia?
- We track 1 Australian seller for the SP0101069; the lowest listed price when we last checked was A$49.70 at Baratza Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SP0101069?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
- Is there anything to reset afterwards?
- No reset: the grinder has no reminder for the burrs.
Something looks wrong with the SP0101069 match? . Reports go to a person, not a bot.