The Baratza Virtuoso+ takes the Baratza Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) (part SP0100801) as its burr; Australian sellers list it from A$24.07 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your grinder
Baratza Virtuoso+
Coffee grinder
Confirmed against Baratza's listConfirmed against Baratza's own compatibility list
Not yours? Change
Takes the SP0100801 burr
Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) · check the code on your old part before ordering.
The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
Your grinder
Coffee grinder
Confirmed against Baratza's listConfirmed against Baratza's own compatibility list
Takes the SP0100801
Burr · check the code on your old part.
The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
Other Baratza grinders that take the SP0100801
GenuineGenuine Baratza
$24.07
Baratza Australia · 1 NovLowest genuine · Baratza Australia · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Baratza. Compatible: another brand.Genuine is made by Baratza. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $24.07
Baratza Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or damaged; Baratza gives no set interval.
After replacing: No reset: the grinder has no reminder for the burrs.
How to change the burr in your Baratza Virtuoso+
Watch the guide or follow the steps.
- 1Grind out any beans left in the hopper, then unplug the grinder.
- 2Turn the hopper anticlockwise until its indicator lines up with the triangle near setting 40, and lift it off.
- 3Use the grind adjustment tabs to turn the adjustment ring fully anticlockwise, then lift the ring burr straight out by its two lifting tabs. Keep the hopper gasket.
- 4Fit the new ring burr with its red lifting tab lined up with the red mark on the adjustment ring (near setting 30) and press it fully down.
- 5Put the hopper gasket on top, thick side down inside the plastic rim of the ring burr.
- 6Line the hopper up with the triangle near 40, push it down and turn it clockwise until it clicks.
Every number this part goes by
- Retail name:
- 6374
- Retail name:
- Baratza 6374
- Retail name:
- Baratza Encore ring burr
- Retail name:
- Baratza Virtuoso+ ring burr
- Retail name:
- SP0100801
Sellers list any of these; they are the same part.
About your Baratza Virtuoso+
Baratza coffee grinder — Virtuoso. Its burr is the Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+), part SP0100801.
Other burrs the maker lists for this grinder: Baratza M2 Conical Burr, Threaded (Virtuoso+). The cone (lower) burr. The Virtuoso+ comes with this M2 burr; changing it means taking the case and gearbox apart, about 20 minutes.
Where the model number is: The model number is usually on a sticker on the underside or back of the machine.
Fits these 2 Baratza models
Common questions
- Which burr fits the Baratza Virtuoso+?
- The Baratza Virtuoso+ takes the Baratza Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) (part SP0100801). The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
- Where can I buy the SP0100801 in Australia?
- We track 1 Australian seller for the SP0100801; the lowest listed price when we last checked was A$24.07 at Baratza Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SP0100801 in a Baratza Virtuoso+?
- No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
- Is there anything to reset afterwards?
- No reset: the grinder has no reminder for the burrs.
Something looks wrong with the Virtuoso+ match? . Reports go to a person, not a bot.