FitMatch
Breville Precision Burr Assembly (SP0110082)

Coffee machine grinder burr

Breville Precision Burr Assembly (SP0110082)

SP0110082

Fits 9 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$51.95

Breville Australia · 1 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Breville. Compatible: another brand.

Lowest price · $51.95

Breville Australia. Every seller we track is listed below. Some links earn us a commission.

Open Breville Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Breville AustraliaGenuine · checked 1 Nov$51.95Open
Open cheapest seller · $51.95

Opens Breville Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is worn or damaged; Breville gives no set interval.

After replacing: No reset: Breville machines and grinders have no reminder for the burrs.

How to change the SP0110082 grinder burr

Watch the guide or follow the steps.

The Barista Express® | A general cleaning guide: the conical burrs | Breville USA · Breville (official)
  1. 1Run the grinder until it is empty, turn the machine off, unplug it and lift off the hopper.
  2. 2Set GRIND SIZE to the finest setting, loosen the nut in the middle of the lower burr with a 10 mm socket (turn it clockwise), then set GRIND SIZE to the coarsest setting.
  3. 3Unlock and lift out the upper burr. Take off the nut, spring washer and flat washer, then carefully lift out the lower burr. The burrs are sharp.
  4. 4Brush the grind chute clean, then fit the new lower burr so its drive pin and cavity line up, and refit the flat washer, spring washer and nut. Turn the nut anticlockwise to tighten it.
  5. 5Fit and lock the new upper burr, set GRIND SIZE back (Barista Express: 5), refit and lock the hopper and check your grind.
Every number this part goes by
Retail name:
SP0110082

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 9 Breville models

BCG600. Breville's Precision Burr Assembly, also listed for the Dose Control Pro: both burrs, upper and lower, in place of the upper burr alone.

BCG820, BES870, BES875, BES876. Breville's Precision Burr Assembly: both burrs, upper and lower, in place of the upper burr alone. Fitting the lower burr means undoing the nut under it.

The other 4 models. Breville's Precision Burr Assembly (upper and lower burrs). Breville lists two versions for this machine, SP0110082 and SP0110076, without saying which build takes which, so check with Breville before you order.

Common questions
What does the SP0110082 fit?
The Breville Precision Burr Assembly (SP0110082) fits 9 Breville models, including the BCG600, BCG820 and BES870. Every one is listed on this page.
Where can I buy the SP0110082 in Australia?
We track 1 Australian seller for the SP0110082; the lowest listed price when we last checked was A$51.95 at Breville Australia. Prices are re-checked daily and dated on this page.
How do I fit the SP0110082?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
Is there anything to reset afterwards?
No reset: Breville machines and grinders have no reminder for the burrs.

Something looks wrong with the SP0110082 match? . Reports go to a person, not a bot.