Baratza grinder burrs

1. 1Swing the portafilter hook aside, close the bean shut-off and press START to run out the beans, then unplug the grinder.
2. 2Turn the grind adjustment assembly past the coarsest setting to the blue install/remove mark; it drops down and out.
3. 3Pull the cone burr and holder away from the adjustment assembly, and move the exit chute across to the new holder.
4. 4Set the new holder on the bench burr-side down and press the adjustment assembly firmly onto it.
5. 5Line up the blue marks, press up and turn the holder until it slides up into the grinder, then turn the assembly until it clicks onto the 1-31 scale.

Different steps for Sette S1 Cone Burr · Different steps for Ceramic Flat Burr, 54 mm (single) · Different steps for Steel Flat Burrs, 54 mm (pair) · Different steps for Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) · Different steps for M2 Quick-Release Cone Burr (Encore ESP, ESP Pro) · Different steps for ESP Ring Burr and Holder (Encore ESP) · Different steps for Ring Burr and Holder for Encore ESP Pro · Different steps for M2 Conical Burr, Threaded (Virtuoso+) · Different steps for M3 Conical Burr (Encore)