FitMatch

The Fisher & Paykel DD60DCX9 takes the Fisher & Paykel DishDrawer drain/microfilter assembly kit 510921 as its filter; Australian sellers list it from A$65.95 as of 2 November 2026. Fitment confirmed against the manufacturer's compatibility list.

Your dishwasher

Dishwasher

Confirmed against Fisher & Paykel's list

Not yours? Change
510921

Takes the 510921

Filter · check the code on your old filter.

Other Fisher & Paykel dishwashers that take the 510921

Genuine

$65.95

Fisher & Paykel Australia · 2 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Fisher & Paykel. Compatible: another brand.

Lowest price · $65.95

Fisher & Paykel Australia. Every seller we track is listed below. Some links earn us a commission.

Open Fisher & Paykel Australia

This dishwasher also takes a flat filter

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Fisher & Paykel AustraliaGenuine · checked 2 Nov$65.95Open
Open cheapest seller · $65.95

Opens Fisher & Paykel Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged; Fisher & Paykel says to clean the drain filter and filter plate once a month, or sooner if you see food particles.

After replacing: After a set number of cycles the filter indicator flashes. Select the drawer showing the alert, then press and hold the filter button (see your user guide) for 2 seconds to clear it.

How to change the filter in your Fisher & Paykel DD60DCX9

Watch the guide or follow the steps.

DishDrawer: How to clean the filters on your DishDrawer · Fisher & Paykel Technical Guides (official)
  1. 1Turn the DishDrawer off at the wall and let it cool. Take care: there may be broken glass in the drawer.
  2. 2Lift the base rack out from the rear to reach the filters.
  3. 3Twist the drain filter anticlockwise and lift it out. To separate the holder and the mesh, pinch one side of the mesh only and pull.
  4. 4Lift the filter plate up and out. Clean the parts in hot soapy water and rinse them.
  5. 5Push the filter plate back onto the tub with no particles in the recess, click the mesh onto the holder until the arrows align, then push the drain filter in and turn it clockwise until its arrows line up with the drawer.
  6. 6To replace a damaged filter, fit the new one in its place the same way and check it locks in.
Every number this part goes by
Retail name:
510921

Sellers list any of these; they are the same part.

About your DD60DCX9

Fisher & Paykel dishwasher — Double DishDrawer. Its filter is the DishDrawer drain/microfilter assembly kit 510921, part 510921.

Also in this dishwasher: Fisher & Paykel DishDrawer filter plate 524467.

Where the model number is: The model is on the rating label on the DishDrawer; Fisher & Paykel's user guide for your model shows where.

Fits these 52 Fisher & Paykel models
Common questions
Which filter fits the Fisher & Paykel DD60DCX9?
The Fisher & Paykel DD60DCX9 takes the Fisher & Paykel DishDrawer drain/microfilter assembly kit 510921.
Where can I buy the 510921 in Australia?
We track 1 Australian seller for the 510921; the lowest listed price when we last checked was A$65.95 at Fisher & Paykel Australia. Prices are re-checked daily and dated on this page.
How do I fit the 510921 in a Fisher & Paykel DD60DCX9?
No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A torn or bent filter lets food scraps through to the pump and spray arms, and dishes come out gritty.
How do I reset the filter light?
After a set number of cycles the filter indicator flashes. Select the drawer showing the alert, then press and hold the filter button (see your user guide) for 2 seconds to clear it.

Something looks wrong with the DD60DCX9 match? . Reports go to a person, not a bot.