FitMatch

The GROHE Blue Pure StartCurve takes the GROHE Blue activated carbon filter 40547001 as its water filter. Fitment confirmed against the manufacturer's compatibility list.

GROHE Blue Pure StartCurve

Your filtered water tap

Tap or under-sink system

Confirmed against GROHE's list

Not yours? Change
40547001

Takes the 40547001

Water filter · check the code on your old filter.

Starter kit 30593000 comes with the activated carbon filter (with a filter timer); tap 30592000 comes without one. Buy the type already in your system.

Other GROHE filtered water taps that take the 40547001

Genuine

See seller

Amazon AU · 26 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by GROHE. Compatible: another brand. Check certification on the seller's page.

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Amazon AUGenuine · no price recordedSee priceOpen

How long it lasts

Replace it at up to 3,000 litres (1,500 litres at 9° dKH on Blue Pure kits with a filter timer), when the cooler, app or timer shows it is due.

After replacing: Reset the filter capacity after the change: on the cooler (Blue Home, Professional) or in the GROHE app, or on the flow meter or filter timer under the sink (Blue Pure). If you change filter type, set the new type and water hardness too.

Flow slows and taste drops off as the filter fills up. Changing on time is the whole point.

How to change the water filter in your GROHE Blue Pure StartCurve

Watch the guide or follow the steps.

How To – Install a GROHE Blue Pure S Size Filter · GROHE Professional (official)
  1. 1Blue Home and Professional: switch the cooler off at the wall before you start. Blue Pure: turn off the cold water to the filter under the sink.
  2. 2Hold a cloth under the filter, then unscrew the old cartridge from the filter head.
  3. 3Screw the new cartridge straight into the filter head, about 1½ to 2 turns, until it stops.
  4. 4Reset the filter capacity on the cooler or in the GROHE app (Blue Home, Professional), or on the flow meter or filter timer (Blue Pure). If you changed filter type, set the new type too.
  5. 5Blue Home and Professional: GROHE asks for the cooler to be cleaned once a year, before a filter change, with cleaning cartridge 40434001.
Every number this part goes by
Retail name:
40 547 001
Retail name:
40547001
Retail name:
GROHE Blue active carbon filter

Sellers list any of these; they are the same part.

About your Blue Pure StartCurve

GROHE filtered water tap, tap or under-sink system — GROHE Blue Pure. Its water filter is the Blue activated carbon filter 40547001, part 40547001.

Other water filters the maker lists for this filtered water tap:

  • GROHE Blue filter S-Size 40404001 (600 litres) (every 12 months). S-Size (600 L): GROHE's standard filter for hard water above 9° dKH. On Blue Pure, S-, M- and UltraSafe filters need GROHE's flow-meter filter head (in the S-Size or UltraSafe filter starter set).
  • GROHE Blue UltraSafe filter 40575002 (every 6 months). UltraSafe: for lead, bacteria and microplastic; change after 6 months at most; set the filter type on the cooler, app or flow meter. On Blue Pure, S-, M- and UltraSafe filters need GROHE's flow-meter filter head (in the S-Size or UltraSafe filter starter set).
  • GROHE Blue Magnesium + Zinc filter 40691002 (400 litres). Magnesium + Zinc (400 L): adds magnesium and zinc; set the filter type on the cooler, app or filter head.

Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.

Fits these 27 GROHE models

Blue Pure Start. Starter kit 30596000 comes with the activated carbon filter (with a filter timer); tap 30595000 comes without one. Buy the type already in your system.

Blue Pure StartCurve. Starter kit 30593000 comes with the activated carbon filter (with a filter timer); tap 30592000 comes without one. Buy the type already in your system.

Blue Pure BauCurve 30385000, Blue Pure Minta 30382000, Blue Pure Mono 30387000. GROHE's parts list for this kit names only the activated carbon filter; the kit has a filter timer, not the flow meter the S-Size needs.

The other 22 models. Activated carbon: GROHE's choice for soft water below 9° dKH; set the filter type on the cooler, app or filter head.

Common questions
Which water filter fits the GROHE Blue Pure StartCurve?
The GROHE Blue Pure StartCurve takes the GROHE Blue activated carbon filter 40547001. Starter kit 30593000 comes with the activated carbon filter (with a filter timer); tap 30592000 comes without one. Buy the type already in your system.
Where can I buy the 40547001 in Australia?
We link to 1 Australian seller for the 40547001; the seller's page shows the current price.
How do I fit the 40547001 in a GROHE Blue Pure StartCurve?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
How do I reset the reminder?
Reset the filter capacity after the change: on the cooler (Blue Home, Professional) or in the GROHE app, or on the flow meter or filter timer under the sink (Blue Pure). If you change filter type, set the new type and water hardness too.

Something looks wrong with the Blue Pure StartCurve match? . Reports go to a person, not a bot.