The Oliveri FS5050-LF takes the Oliveri FR5950 inline filter cartridge, harsh water (5 micron) as its water filter; replace it every 12 months; Australian sellers list it from A$124.00 as of 29 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your filtered water tap
Oliveri FS5050-LF
Tap or under-sink system
Confirmed against Oliveri's listConfirmed against Oliveri's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the FR5950 water filter
FR5950 inline filter cartridge, harsh water (5 micron) · replace every 12 months · check the code printed on your old filter before ordering.
Your filtered water tap
Tap or under-sink system
Confirmed against Oliveri's listConfirmed against Oliveri's own compatibility list
Takes the FR5950
Water filter · every 12 months · check the code on your old filter.
Other Oliveri filtered water taps and their filters
The FR5950 fits the FS5050-LF only. These Oliveri models take a different water filter:
GenuineGenuine Oliveri
$124.00
Cass Brothers · 29 OctLowest genuine · Cass Brothers · checked 29 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Oliveri. Compatible: another brand. Check certification on the seller's page.Genuine is made by Oliveri. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest price · $124.00
Cass Brothers. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Cass Brothers in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the water filter in your Oliveri FS5050-LF
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn off the cold water at the under-sink isolation valve; Oliveri also suggests turning it off at the mains.
- 2Turn the filtered tap on to let the pressure out of the filter system.
- 3Twist the old cartridge to the left and pull it down out of the head.
- 4Line up the notches on the new cartridge with the head, push it up and twist it to the right.
- 5Turn the water back on, run the filtered tap for 2–3 minutes to clear the air (cloudy water clears), then turn it off and check for leaks.
- 6Write the date on the pink sticker and stick it on the cartridge.
Every number this part goes by
- Retail name:
- FR5950
Sellers list any of these; they are the same part.
About your Oliveri FS5050-LF
Oliveri filtered water tap, tap or under-sink system — Oliveri inline water filtration system. Its water filter is the FR5950 inline filter cartridge, harsh water (5 micron), part FR5950, changed every 12 months.
Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.
Fits this Oliveri model
Oliveri1 model
Common questions
- Which water filter fits the Oliveri FS5050-LF?
- The Oliveri FS5050-LF takes the Oliveri FR5950 inline filter cartridge, harsh water (5 micron).
- How often should I replace the water filter in my Oliveri FS5050-LF?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the FR5950 in Australia?
- We track 3 Australian sellers for the FR5950; the lowest listed price when we last checked was A$124.00 at Cass Brothers. Prices are re-checked daily and dated on this page.
- How do I fit the FR5950 in an Oliveri FS5050-LF?
- No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- Is there anything to reset afterwards?
- No reset button. Write the change date on the sticker supplied with the cartridge; Oliveri also offers email reminders when you register the filter.
Something looks wrong with the FS5050-LF match? . Reports go to a person, not a bot.