Oliveri replacement filters
Which replacement filter each of the 5 Oliveri water taps and under-sink systems sold in Australia takes, with dated prices from 5 Australian sellers.
Most take the FR7905 (3 of 5 models), from $120.00. Check yours below.
FR7905 satellite / 3-way filter cartridge (1 micron)takes FR7905
FR5910 inline filter cartridge, standard water (1 micron)takes FR5910
FR5950 inline filter cartridge, harsh water (5 micron)takes FR5950
How to change your Oliveri filter
Steps for the FR7905 satellite / 3-way filter cartridge (1 micron) (FR7905), the water filter 3 Oliveri models take. Change it every 12 months.
No clear video for this water filter yet. The steps cover it.
- 1Turn off the cold water at the under-sink isolation valve; Oliveri also suggests turning it off at the mains.
- 2Turn the filtered tap on to let the pressure out of the filter system.
- 3Twist the old cartridge to the left and pull it down out of the head.
- 4Line up the notches on the new cartridge with the head, push it up and twist it to the right.
- 5Turn the water back on, run the filtered tap for 2–3 minutes to clear the air (cloudy water clears), then turn it off and check for leaks.
- 6Write the date on the pink sticker and stick it on the cartridge.
Reset the filter light
No reset button. Write the change date on the sticker supplied with the cartridge; Oliveri also offers email reminders when you register the filter.
Get a reminder when your Oliveri filter is due
Most Oliveri models here change it every 12 months. One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.
Common questions
- How often should I change an Oliveri filter?
- Every 12 months for the FR7905 satellite / 3-way filter cartridge (1 micron), the most common Oliveri water filter here. Each model page shows the interval for its own water filter.
- What happens if I don't change the water filter?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- How do I reset the filter light on an Oliveri tap or under-sink system?
- No reset button. Write the change date on the sticker supplied with the cartridge; Oliveri also offers email reminders when you register the filter.
All 5 Oliveri filtered water taps we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Oliveri. Fitment sources are recorded on every model page.