FitMatch

The Bosch WTR85T00AU takes the Bosch / Siemens double fluff filter 00656033 (heat pump dryers) as its lint filter; Australian sellers list it from A$39.90 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Bosch WTR85T00AU

Your dryer

Clothes dryer

Confirmed against Bosch's list

00656033

Takes the 00656033

Lint filter · check the code on your old filter.

Other Bosch dryers that take the 00656033

Genuine

$39.90

eBay AU · 26 Oct

Compatible

$45.99

eBay AU · 26 Oct

Check seller

Genuine: made by Bosch. Compatible: another brand.

Lowest compatible · $45.99

eBay AU. Compare with genuine below. Some links earn us a commission.

Open eBay AU

This dryer also takes a foam filter

Compare 4 listings from 3 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $39.90

Opens eBay AU in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the mesh is torn or the frame is damaged; clean it after every drying cycle.

After replacing: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

How to change the lint filter in your Bosch WTR85T00AU

Watch the guide or follow the steps.

How Do I Clean My Tumble Dryer Filter - Cleaning & Care | Bosch Home New Zealand · Bosch Home Australia and New Zealand (official)
  1. 1Wait until the programme has finished or the display asks you to clean the filter, then open the door.
  2. 2Remove any fluff from around the door, then pull the fluff filter out of the door opening. Do not let fluff fall into the air channel.
  3. 3Take the two-part filter apart one part at a time, open both filters and pick out the fluff. Put it in the household rubbish.
  4. 4Rinse both filters under warm running water and dry them.
  5. 5Close the two filters, fit them together, push the filter back into the door opening and close the door.
Every number this part goes by
Retail name:
00656033
Retail name:
656033

Sellers list any of these; they are the same part.

About your WTR85T00AU

Bosch clothes dryer — Series 6 heat pump tumble dryer. Its lint filter is the double fluff filter 00656033 (heat pump dryers), part 00656033.

Also in this dryer: Bosch heat pump base filter mat 12022801 (WTR85T00AU, WQG24203AU).

Where the model number is: The model number is on the rating label inside the door or around the door opening; on some dryers it is on the back. It reads like WTW87565AU or EDH3284PDW.

Fits these 29 models
Common questions
Which lint filter fits the Bosch WTR85T00AU?
The Bosch WTR85T00AU takes the Bosch / Siemens double fluff filter 00656033 (heat pump dryers). Compatible filters made to the same specification also fit.
Where can I buy the 00656033 in Australia?
We track 3 Australian sellers for the 00656033; the lowest listed price when we last checked was A$39.90 at eBay AU. Prices are re-checked daily and dated on this page.
How do I fit the 00656033 in a Bosch WTR85T00AU?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
Is there anything to reset afterwards?
No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Something looks wrong with the WTR85T00AU match? . Reports go to a person, not a bot.