FitMatch

The Electrolux EDH812R7WC takes the Electrolux / AEG fluff filter assembly 140200821027 as its lint filter; Australian sellers list it from A$69.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Electrolux EDH812R7WC

Your dryer

Clothes dryer

Confirmed against Electrolux's list

140200821027

Takes the 140200821027

Lint filter · check the code on your old filter.

Other Electrolux dryers that take the 140200821027

Genuine

$69.99

AEG Australia · 26 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Electrolux. Compatible: another brand.

Lowest price · $69.99

AEG Australia. Every seller we track is listed below. Some links earn us a commission.

Open AEG Australia

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $69.99

Opens AEG Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the mesh is torn or the frame no longer seals; clean it after every drying cycle.

After replacing: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

How to change the lint filter in your Electrolux EDH812R7WC

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Open the door and pull the filter up out of the door opening.
  2. 2Push the hook to open the filter.
  3. 3Gather the lint by hand from both inside parts of the filter and put it in the bin. Electrolux says not to wash this filter with water, so the fibres stay out of the drain.
  4. 4If needed, clean the filter with a vacuum cleaner, then close it.
  5. 5If needed, vacuum lint from the filter socket and its gasket, then put the filter back in the socket. Never run the dryer without the filter.
Every number this part goes by
Retail name:
140200821027

Sellers list any of these; they are the same part.

About your EDH812R7WC

Electrolux clothes dryer — 8KG UltimateCare Plus Heat Pump Dryer. Its lint filter is the fluff filter assembly 140200821027, part 140200821027.

Where the model number is: The model number is on the rating label inside the door or around the door opening; on some dryers it is on the back. It reads like WTW87565AU or EDH3284PDW.

Fits these 3 models

Electrolux2 models

AEG1 model

AEG T959V6PRC, Electrolux EDH912R9WC. The maker lists two versions of this filter for this model (they differ by production number, PNC, on the rating plate); check the code on the filter you are replacing.

Common questions
Which lint filter fits the Electrolux EDH812R7WC?
The Electrolux EDH812R7WC takes the Electrolux / AEG fluff filter assembly 140200821027.
Where can I buy the 140200821027 in Australia?
We track 2 Australian sellers for the 140200821027; the lowest listed price when we last checked was A$69.99 at AEG Australia. Prices are re-checked daily and dated on this page.
How do I fit the 140200821027 in an Electrolux EDH812R7WC?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
Is there anything to reset afterwards?
No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Something looks wrong with the EDH812R7WC match? . Reports go to a person, not a bot.