FitMatch

Electrolux dryer filters

Which lint filter or foam filter each of the 25 Electrolux dryers sold in Australia takes, with dated prices from 4 Australian sellers.

Showing 21 of 25 Electrolux models

Fluff filter assembly, grey 8588074539053takes 8588074539053

Fluff filter 140075066062 (UltimateCare 700/900)takes 140075066062

Condenser dryer lint filter, air intake 1254242306takes 1254242306

Vented dryer lint filter assembly 140176012023takes 140176012023

/ AEG fluff filter assembly, white 8588074539012takes 8588074539012

Heat pump base filter, small 1366349015takes 1366349015

Fluff filter assembly 140200821027takes 140200821027

Fluff filter 140075066047takes 140075066047

Loading more models…

How to change your Electrolux dryer filter

Steps for the / AEG fluff filter assembly, white 8588074539012 (8588074539012), the filter 5 Electrolux models take.

No clear video for this filter yet. The steps cover it.

  1. 1Open the door and pull the filter up out of the door opening.
  2. 2Push the hook to open the filter.
  3. 3Gather the lint by hand from both inside parts of the filter and put it in the bin. Electrolux says not to wash this filter with water, so the fibres stay out of the drain.
  4. 4If needed, clean the filter with a vacuum cleaner, then close it.
  5. 5If needed, vacuum lint from the filter socket and its gasket, then put the filter back in the socket. Never run the dryer without the filter.

Different steps for condenser dryer lint filter, air intake 1254242306 · Different steps for condenser dryer lint filter, air intake 1254242504 · Different steps for vented dryer lint filter assembly 140176012023 · Different steps for heat pump base filter, small 1366349015 · Different steps for felt door filter 1254246208 (EDI97170W) · Different steps for lint filter 1366339024 (EDH3284PDW, T96690IH) · Different steps for heat pump base filter, grey 1366344032

Clear the filter warning

No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Common questions

What happens if I don't change the filter?
Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
How do I clear the filter warning on an Electrolux dryer?
No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.
All 25 Electrolux dryers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Electrolux. Fitment sources are recorded on every model page.