The Coolair CPQ1100 takes the Braemar Chillcel large pad 4-pack 114606 (90 mm, also fits Coolair) as its pad kit; Australian sellers list it from A$408.00 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your evaporative cooler
Coolair CPQ1100
Evaporative cooler
Confirmed against Coolair's listConfirmed against Coolair's own compatibility list
Not yours? Change
Takes the 114606 pad kit
Chillcel large pad 4-pack 114606 (90 mm, also fits Coolair) · check the code on your old part before ordering.
Your evaporative cooler
Evaporative cooler
Confirmed against Coolair's listConfirmed against Coolair's own compatibility list
Takes the 114606
Pad kit · check the code on your old part.
Other Coolair evaporative coolers that take the 114606
GenuineGenuine Braemar
$486.00
HVAC Shop · 1 NovLowest genuine · HVAC Shop · checked 1 Nov
CompatibleCompatible option
$408.00
Plumbonline · 1 NovPlumbonline · checked 1 Nov
Check sellerCheck seller details
Genuine: made by Braemar. Compatible: another brand.Genuine is made by Braemar. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $408.00
Plumbonline. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pads are in poor condition or salted up, Seeley says; have them checked at the service before summer, at least every 2 years on a home cooler.
After replacing: No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
How to change the pad kit in your Coolair CPQ1100
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the cooler off at the wall control, then switch it off at the isolating switch inside the cooler. Seeley recommends an authorised Seeley dealer or service agent for any work on the roof: climbing onto the roof is hazardous, and its manuals say maintenance is for a qualified, licensed technician.
- 2Working at heights needs extra safety precautions, Seeley warns: only go up if you can reach the cooler safely. Remove each pad frame: insert a flat screwdriver tip into the slot and lever until it lets go, pull the frame towards you until the internal side clips release, then pivot it outwards and lift it up.
- 3Pull out the pad pins and washers and lift out the old pads. On the LCS, note the rebates: each 120 mm pad goes where its rebate clears the float valve or drain valve.
- 4Fit the new Chillcel pads with the header block at the top, and push new pins and washers through until they sit flush. Check the pins and washers are not damaged.
- 5Refit the frames and clips, switch the power back on and run the cooler; never run it with the pad frames off. Flush the new pads: use Pad Flush in the MagIQtouch settings menu if you have it, or fill the tank, run the pump for about 5 minutes and drain it. Check that the pads wet evenly.
Every number this part goes by
- Retail name:
- 114606
Sellers list any of these; they are the same part.
About your Coolair CPQ1100
Coolair evaporative cooler — CPQ (2015 on). Its pad kit is the Chillcel large pad 4-pack 114606 (90 mm, also fits Coolair), part 114606.
Where the model number is: The model is on the label inside the cooler or on its control box, and in the manual. Don't go on the roof to look: the manual or the installer's paperwork usually has it.
Fits these 25 models
Common questions
- Which pad kit fits the Coolair CPQ1100?
- The Coolair CPQ1100 takes the Braemar Chillcel large pad 4-pack 114606 (90 mm, also fits Coolair).
- Where can I buy the 114606 in Australia?
- We track 3 Australian sellers for the 114606; the lowest listed price when we last checked was A$408.00 at Plumbonline. Prices are re-checked daily and dated on this page.
- How do I fit the 114606 in a Coolair CPQ1100?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.
Something looks wrong with the CPQ1100 match? . Reports go to a person, not a bot.