Cold press juicer filter
Hurom H400 multi-screw, upper part (HX4003a)
HX4003a
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Hurom
$89.00
Hurom Australia · 28 OctLowest genuine · Hurom Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Hurom. Compatible: another brand.Genuine is made by Hurom. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $89.00
Hurom Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged or worn and juicing suffers; Hurom gives no set interval.
After replacing: No reset: Hurom juicers have no reminder for this part.
How to change the HX4003a juicer filter
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Turn the hopper to open it and lift the chamber set off the body.
- 3Lift out the multi-screw: Hurom's H400 and H70 books name a bottom part and a top part.
- 4Place the bottom part of the multi-screw into the chamber, insert the top part and press the assembled set down firmly.
- 5Refit the hopper with its guide mark lined up, turn it to lock, and place the chamber set back on the body.
Every number this part goes by
- Retail name:
- HX4003a
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Hurom model
Hurom1 model
The upper part of the multi-screw. Hurom's multi-screw comes in two parts (upper and lower) and Hurom Australia sells each separately; buy the part that is cracked or damaged.
Common questions
- What does the HX4003a fit?
- The Hurom H400 multi-screw, upper part (HX4003a) fits the Hurom H400.
- Where can I buy the HX4003a in Australia?
- We track 1 Australian seller for the HX4003a; the lowest listed price when we last checked was A$89.00 at Hurom Australia. Prices are re-checked daily and dated on this page.
- How do I fit the HX4003a?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Hurom juicers have no reminder for this part.
Something looks wrong with the HX4003a match? . Reports go to a person, not a bot.