FitMatch

The Hurom H400 takes the Hurom H400 multi-screw, lower part (HX4003b) as its filter; Australian sellers list it from A$59.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Hurom H400

Your cold press juicer

Cold press juicer

Confirmed against Hurom's list

Not yours? Change
HX4003b

Takes the HX4003b

Filter · check the code on your old filter.

Hurom's multi-screw comes in two parts (upper and lower) and Hurom Australia sells each separately; buy the part that is cracked or damaged.

Other Hurom models and their filters and parts

The HX4003b fits the H400 only. These Hurom models take a different filter:

Genuine

$59.00

Hurom Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Hurom. Compatible: another brand.

Lowest price · $59.00

Hurom Australia. Every seller we track is listed below. Some links earn us a commission.

Open Hurom Australia

Other parts this cold press juicer takes

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Hurom AustraliaGenuine · checked 28 Oct$59.00Open
Open cheapest seller · $59.00

Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged or worn and juicing suffers; Hurom gives no set interval.

After replacing: No reset: Hurom juicers have no reminder for this part.

How to change the filter in your Hurom H400

Watch the guide or follow the steps.

H400 : Unboxing & Assembly Guide · Hurom Global (official)
  1. 1Switch the juicer off and unplug it.
  2. 2Turn the hopper to open it and lift the chamber set off the body.
  3. 3Lift out the multi-screw: Hurom's H400 and H70 books name a bottom part and a top part.
  4. 4Place the bottom part of the multi-screw into the chamber, insert the top part and press the assembled set down firmly.
  5. 5Refit the hopper with its guide mark lined up, turn it to lock, and place the chamber set back on the body.
Every number this part goes by
Retail name:
HX4003b

Sellers list any of these; they are the same part.

About your H400

Hurom juicer, cold press juicer — H400. Its filter is the H400 multi-screw, lower part (HX4003b), part HX4003b.

Other filters the maker lists for this cold press juicer: Hurom H400 multi-screw, upper part (HX4003a). The upper part of the multi-screw. Hurom's multi-screw comes in two parts (upper and lower) and Hurom Australia sells each separately; buy the part that is cracked or damaged.

Also in this cold press juicer:

Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.

Fits this Hurom model

Hurom1 model

Hurom's multi-screw comes in two parts (upper and lower) and Hurom Australia sells each separately; buy the part that is cracked or damaged.

Common questions
Which filter fits the Hurom H400?
The Hurom H400 takes the Hurom H400 multi-screw, lower part (HX4003b). Hurom's multi-screw comes in two parts (upper and lower) and Hurom Australia sells each separately; buy the part that is cracked or damaged.
Where can I buy the HX4003b in Australia?
We track 1 Australian seller for the HX4003b; the lowest listed price when we last checked was A$59.00 at Hurom Australia. Prices are re-checked daily and dated on this page.
How do I fit the HX4003b in a Hurom H400?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
Is there anything to reset afterwards?
No reset: Hurom juicers have no reminder for this part.

Something looks wrong with the H400 match? . Reports go to a person, not a bot.