FitMatch
Kuvings AUTO10 coarse juice strainer (SPARE-AUTO10-COARSE-V2)

Cold press juicer filter

Kuvings AUTO10 coarse juice strainer (SPARE-AUTO10-COARSE-V2)

SPARE-AUTO10-COARSE-V2

Fits 1 model

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$89.00

Kuvings Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Kuvings. Compatible: another brand.

Lowest price · $89.00

Kuvings Australia. Every seller we track is listed below. Some links earn us a commission.

Open Kuvings Australia

Compare 2 listings from 1 seller

AUD, before delivery. Each price shows when it was checked.

Kuvings AustraliaGenuine · checked 28 Oct$89.00Open
Kuvings AustraliaGenuine · checked 28 Oct$89.00Open
Open cheapest seller · $89.00

Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged; it is an optional strainer, and Kuvings gives no set interval.

After replacing: No reset: Kuvings juicers have no reminder for this part.

How to change the SPARE-AUTO10-COARSE-V2 juicer filter

Watch the guide or follow the steps.

Kuvings AUTO10 Training Video - How to Assemble · Kuvings Australia (official)
  1. 1Switch the juicer off and unplug it.
  2. 2Press the handle switch and turn the handle anticlockwise to open the auto hopper, then lift the auto hopper and drum set off the base.
  3. 3Lift out the juicing screw, then the strainer and rotation wiper.
  4. 4Push the strainer completely into the rotation wiper and place them in the drum with the red dots lined up. Check the silicone ring is in the strainer.
  5. 5Press the screw into the centre of the strainer, refit the drum set and auto hopper, and turn the hopper clockwise to lock.
Every number this part goes by
Retail name:
SPARE-AUTO10-COARSE-V2

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits this Kuvings model

Kuvings1 model

Optional coarse strainer. Kuvings sells a version for strainers with a seal and one for early AUTO10 strainers without; check yours before you order.

Common questions
What does the SPARE-AUTO10-COARSE-V2 fit?
The Kuvings AUTO10 coarse juice strainer (SPARE-AUTO10-COARSE-V2) fits the Kuvings AUTO10.
Where can I buy the SPARE-AUTO10-COARSE-V2 in Australia?
We track 1 Australian seller for the SPARE-AUTO10-COARSE-V2; the lowest listed price when we last checked was A$89.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
How do I fit the SPARE-AUTO10-COARSE-V2?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
Is there anything to reset afterwards?
No reset: Kuvings juicers have no reminder for this part.

Something looks wrong with the SPARE-AUTO10-COARSE-V2 match? . Reports go to a person, not a bot.