The Kuvings AUTO10 takes the Kuvings AUTO10 juice strainer (SPARE-AUTO10-STRAINER-V3) as its filter; Australian sellers list it from A$89.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Kuvings AUTO10
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Not yours? Change
Takes the SPARE-AUTO10-STRAINER-V3 filter
AUTO10 juice strainer (SPARE-AUTO10-STRAINER-V3) · check the code printed on your old filter before ordering.
For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Takes the SPARE-AUTO10-STRAINER-V3
Filter · check the code on your old filter.
For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering.
Other Kuvings models and their filters and parts
The SPARE-AUTO10-STRAINER-V3 fits the AUTO10 only. These Kuvings models take a different filter:
GenuineGenuine Kuvings
$89.00
Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $89.00
Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this cold press juicer takes
- Kuvings AUTO10 spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ-AUTO)Open Kuvings Australia$9.98 each · 2-pack $19.95
The silicone part. Separate from the filter.
- Kuvings AUTO10 juicing screw (SPARE-AUTO10-AUGER-V3)Open Kuvings Australia$129.00
The auger. For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering. Separate from the filter.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged and juicing suffers; Kuvings says part life depends on how much and what you juice, and gives no set interval.
After replacing: No reset: Kuvings juicers have no reminder for this part.
How to change the filter in your Kuvings AUTO10
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Press the handle switch and turn the handle anticlockwise to open the auto hopper, then lift the auto hopper and drum set off the base.
- 3Lift out the juicing screw, then the strainer and rotation wiper.
- 4Push the strainer completely into the rotation wiper and place them in the drum with the red dots lined up. Check the silicone ring is in the strainer.
- 5Press the screw into the centre of the strainer, refit the drum set and auto hopper, and turn the hopper clockwise to lock.
Every number this part goes by
- Retail name:
- SPARE-AUTO10-STRAINER-V3
Sellers list any of these; they are the same part.
About your Kuvings AUTO10
Kuvings juicer, cold press juicer — AUTO. Its filter is the AUTO10 juice strainer (SPARE-AUTO10-STRAINER-V3), part SPARE-AUTO10-STRAINER-V3.
Other filters the maker lists for this cold press juicer: Kuvings AUTO10 coarse juice strainer (SPARE-AUTO10-COARSE-V2). Optional coarse strainer. Kuvings sells a version for strainers with a seal and one for early AUTO10 strainers without; check yours before you order.
Also in this cold press juicer:
- Kuvings AUTO10 spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ-AUTO).
- Kuvings AUTO10 juicing screw (SPARE-AUTO10-AUGER-V3). For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering.
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Fits this Kuvings model
Kuvings1 model
For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering.
Common questions
- Which filter fits the Kuvings AUTO10?
- The Kuvings AUTO10 takes the Kuvings AUTO10 juice strainer (SPARE-AUTO10-STRAINER-V3). For AUTO10-BL, -WT, -RD and -SV. Kuvings asks owners of the AUTO10-BK or AUTO10-WH to contact its head office before ordering.
- Where can I buy the SPARE-AUTO10-STRAINER-V3 in Australia?
- We track 1 Australian seller for the SPARE-AUTO10-STRAINER-V3; the lowest listed price when we last checked was A$89.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SPARE-AUTO10-STRAINER-V3 in a Kuvings AUTO10?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Kuvings juicers have no reminder for this part.
Something looks wrong with the AUTO10 match? . Reports go to a person, not a bot.