What happens if I don't change it?

A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.

Cold press juicer silicone part

Kuvings CS600 and CS700 silicone plug, 40 mm (SPARE-CS-STRAINERSEAL)

SPARE-CS-STRAINERSEAL

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Kuvings

$6.00

Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Lowest price · $6.00

Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Kuvings Australia · $6.00

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Kuvings

1 seller

Kuvings AustraliaGenuine · checked 28 OctGenuine part · Lowest genuinechecked 28 Oct$6.00OpenGo to seller

Open cheapest seller · $6.00

Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is torn, stretched or worn, or juice leaks; Kuvings gives no set interval.

After replacing: No reset: Kuvings juicers have no reminder for this part.

How to change the SPARE-CS-STRAINERSEAL silicone part

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

1Switch the juicer off and unplug it.
2Open the lid and lift out the juicing screw, then the strainer and rotation wiper.
3Pull the old silicone ring out of the strainer.
4Push the new ring into the groove, wide side facing down, and check it is firmly in place.
5Refit the strainer into the wiper, place them in the bowl with the red dots lined up, refit the screw and close the lid.

Every number this part goes bySPARE-CS-STRAINERSEAL

Retail name:: SPARE-CS-STRAINERSEAL

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits these 2 Kuvings modelsCS600, CS700

Kuvings2 models

The 40 mm silicone plug for the current strainer; the previous strainer takes a 35 mm plug.

Common questionsWhat does the SPARE-CS-STRAINERSEAL fit? · Where can I buy the SPARE-CS-STRAINERSEAL in Australia? · How do I fit the SPARE-CS-STRAINERSEAL?

What does the SPARE-CS-STRAINERSEAL fit?: The Kuvings CS600 and CS700 silicone plug, 40 mm (SPARE-CS-STRAINERSEAL) fits the Kuvings CS600 and CS700.
Where can I buy the SPARE-CS-STRAINERSEAL in Australia?: We track 1 Australian seller for the SPARE-CS-STRAINERSEAL; the lowest listed price when we last checked was A$6.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
How do I fit the SPARE-CS-STRAINERSEAL?: No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
Is there anything to reset afterwards?: No reset: Kuvings juicers have no reminder for this part.

Something looks wrong with the SPARE-CS-STRAINERSEAL match? . Reports go to a person, not a bot.