The Kuvings CS600 takes the Kuvings CS600 juice strainer with 2 spare seals (SPARE-CS600-STRAINER) as its filter; Australian sellers list it from A$99.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Kuvings CS600
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Not yours? Change
Takes the SPARE-CS600-STRAINER filter
CS600 juice strainer with 2 spare seals (SPARE-CS600-STRAINER) · check the code printed on your old filter before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Takes the SPARE-CS600-STRAINER
Filter · check the code on your old filter.
Other Kuvings models and their filters and parts
The SPARE-CS600-STRAINER fits the CS600 only. These Kuvings models take a different filter:
GenuineGenuine Kuvings
$99.00
Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $99.00
Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this cold press juicer takes
- Kuvings CS600 spare parts pack: silicone wings and strainer seals (CS600-SPP1)Open Kuvings Australia$9.98 each · 2-pack $19.95
The silicone part. Separate from the filter.
- Kuvings commercial silicone wings, 2 (5000-00582A)Open Kuvings Australia$3.00 each · 2-pack $6.00
The silicone part. The silicone wings on their own (2 wings). Separate from the filter.
- Kuvings CS600 and CS700 silicone plug, 40 mm (SPARE-CS-STRAINERSEAL)Open Kuvings Australia$6.00
The silicone part. The 40 mm silicone plug for the current strainer; the previous strainer takes a 35 mm plug. Separate from the filter.
- Kuvings CS600 and CS700 juicing screw (SPARE-CS-AUGER)Open Kuvings Australia$149.00
The auger. Separate from the filter.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged and juicing suffers; Kuvings says part life depends on how much and what you juice, and gives no set interval.
After replacing: No reset: Kuvings juicers have no reminder for this part.
How to change the filter in your Kuvings CS600
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch the juicer off and unplug it.
- 2Turn the drum lid anticlockwise to open it and lift the top-set off the body.
- 3Remove the juicing screw, then the strainer and rotation wiper unit from the juicing bowl.
- 4Fit the strainer into the rotation wiper and place them in the juicing bowl with the red dot on the strainer lined up with the red dot on the bowl.
- 5Put the juicing screw into the strainer, turn and press until it clicks, then refit the drum lid and turn it to close.
Every number this part goes by
- Retail name:
- SPARE-CS600-STRAINER
Sellers list any of these; they are the same part.
About your Kuvings CS600
Kuvings juicer, cold press juicer — Commercial. Its filter is the CS600 juice strainer with 2 spare seals (SPARE-CS600-STRAINER), part SPARE-CS600-STRAINER.
Other filters the maker lists for this cold press juicer: Kuvings CS600 and CS700 coarse juice strainer (SPARE-CS-COARSE). Optional coarse strainer for thicker juice with more pulp.
Also in this cold press juicer:
- Kuvings CS600 spare parts pack: silicone wings and strainer seals (CS600-SPP1), Kuvings CS600 and CS700 juicing screw (SPARE-CS-AUGER).
- Kuvings commercial silicone wings, 2 (5000-00582A). The silicone wings on their own (2 wings).
- Kuvings CS600 and CS700 silicone plug, 40 mm (SPARE-CS-STRAINERSEAL). The 40 mm silicone plug for the current strainer; the previous strainer takes a 35 mm plug.
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Fits this Kuvings model
Kuvings1 model
Common questions
- Which filter fits the Kuvings CS600?
- The Kuvings CS600 takes the Kuvings CS600 juice strainer with 2 spare seals (SPARE-CS600-STRAINER).
- Where can I buy the SPARE-CS600-STRAINER in Australia?
- We track 1 Australian seller for the SPARE-CS600-STRAINER; the lowest listed price when we last checked was A$99.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SPARE-CS600-STRAINER in a Kuvings CS600?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Kuvings juicers have no reminder for this part.
Something looks wrong with the CS600 match? . Reports go to a person, not a bot.