What happens if I don't change it?

A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.

Cold press juicer silicone part

Kuvings silicone ring for the bowl, B series and E6000 (SPARE-SILICONE-BOWLRING)

SPARE-SILICONE-BOWLRING

Fits 5 models

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Kuvings

$4.95

Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Lowest price · $4.95

Kuvings Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Kuvings Australia · $4.95

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Kuvings

1 seller

Kuvings AustraliaGenuine · checked 28 OctGenuine part · Lowest genuinechecked 28 Oct$4.95OpenGo to seller

Open cheapest seller · $4.95

Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is torn, stretched or worn, or juice leaks; Kuvings gives no set interval.

After replacing: No reset: Kuvings juicers have no reminder for this part.

How to change the SPARE-SILICONE-BOWLRING silicone part

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

1Switch the juicer off and unplug it.
2Open the lid and lift the top-set off the body, then take out the juicing screw, strainer and rotation wiper.
3Pull the old silicone ring out of the bottom of the juicing bowl.
4Plug the new ring firmly into place and check it is seated all the way round.
5Reassemble the top-set and refit it to the body.

Every number this part goes bySPARE-SILICONE-BOWLRING

Retail name:: SPARE-SILICONE-BOWLRING

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits these 5 Kuvings models998SAS, B3000, B6000, B8000, E6000

Kuvings5 models

The silicone ring for the juicing bowl.

Common questionsWhat does the SPARE-SILICONE-BOWLRING fit? · Where can I buy the SPARE-SILICONE-BOWLRING in Australia? · How do I fit the SPARE-SILICONE-BOWLRING?

What does the SPARE-SILICONE-BOWLRING fit?: The Kuvings silicone ring for the bowl, B series and E6000 (SPARE-SILICONE-BOWLRING) fits 5 Kuvings models, including the 998SAS, B3000 and B6000. Every one is listed on this page.
Where can I buy the SPARE-SILICONE-BOWLRING in Australia?: We track 1 Australian seller for the SPARE-SILICONE-BOWLRING; the lowest listed price when we last checked was A$4.95 at Kuvings Australia. Prices are re-checked daily and dated on this page.
How do I fit the SPARE-SILICONE-BOWLRING?: No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
Is there anything to reset afterwards?: No reset: Kuvings juicers have no reminder for this part.

Something looks wrong with the SPARE-SILICONE-BOWLRING match? . Reports go to a person, not a bot.