The Kuvings B8000 takes the Kuvings juice strainer for B series (SPARE-B-SERIES-STRAINER) as its filter; Australian sellers list it from A$49.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Kuvings B8000
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Not yours? Change
Takes the SPARE-B-SERIES-STRAINER filter
juice strainer for B series (SPARE-B-SERIES-STRAINER) · check the code printed on your old filter before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Kuvings's listConfirmed against Kuvings's own compatibility list
Takes the SPARE-B-SERIES-STRAINER
Filter · check the code on your old filter.
Other Kuvings cold press juicers that take the SPARE-B-SERIES-STRAINER
GenuineGenuine Kuvings
$49.00
Kuvings Australia · 28 OctLowest genuine · Kuvings Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Kuvings. Compatible: another brand.Genuine is made by Kuvings. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $49.00
Kuvings Australia. Out of stock when we checked. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this cold press juicer takes
- Kuvings silicone wings for B6000 and B8000 (SPARE-B-SERIES-WINGS)Open Kuvings Australia$8.00
The silicone part. Separate from the filter.
- Kuvings silicone ring for the bowl, B series and E6000 (SPARE-SILICONE-BOWLRING)Open Kuvings Australia$4.95
The silicone part. The silicone ring for the juicing bowl. Separate from the filter.
- Kuvings juicing screw for B series and E6000 (SPARE-B-SERIES-AUGER)Open Kuvings Australia$89.00
The auger. Separate from the filter.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or damaged, Kuvings says; it gives no set interval.
After replacing: No reset: Kuvings juicers have no reminder for this part.
How to change the filter in your Kuvings B8000
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Turn the drum lid anticlockwise to open it and lift the top-set off the body.
- 3Remove the juicing screw, then the strainer and rotation wiper unit from the juicing bowl.
- 4Fit the strainer into the rotation wiper and place them in the juicing bowl with the red dot on the strainer lined up with the red dot on the bowl.
- 5Put the juicing screw into the strainer, turn and press until it clicks, then refit the drum lid and turn it to close.
Every number this part goes by
- Retail name:
- SPARE-B-SERIES-STRAINER
Sellers list any of these; they are the same part.
About your Kuvings B8000
Kuvings juicer, cold press juicer — B series. Its filter is the juice strainer for B series (SPARE-B-SERIES-STRAINER), part SPARE-B-SERIES-STRAINER.
Also in this cold press juicer:
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Common questions
- Which filter fits the Kuvings B8000?
- The Kuvings B8000 takes the Kuvings juice strainer for B series (SPARE-B-SERIES-STRAINER).
- Where can I buy the SPARE-B-SERIES-STRAINER in Australia?
- We track 1 Australian seller for the SPARE-B-SERIES-STRAINER; the lowest listed price when we last checked was A$49.00 at Kuvings Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SPARE-B-SERIES-STRAINER in a Kuvings B8000?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Kuvings juicers have no reminder for this part.
Something looks wrong with the B8000 match? . Reports go to a person, not a bot.