FitMatch

The Hurom H25 takes the Hurom Ultem fine strainer for H26, H25 and HAA (HX251) as its filter; Australian sellers list it from A$49.95 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your cold press juicer

Cold press juicer

Confirmed against Hurom's list

Not yours? Change
HX251

Takes the HX251

Filter · check the code on your old filter.

Other Hurom cold press juicers that take the HX251

Genuine

$49.95

Hurom Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Hurom. Compatible: another brand.

Lowest price · $49.95

Hurom Australia. Every seller we track is listed below. Some links earn us a commission.

Open Hurom Australia

Other parts this cold press juicer takes

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Hurom AustraliaGenuine · checked 28 Oct$49.95Open
Open cheapest seller · $49.95

Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged or worn and juicing suffers; Hurom gives no set interval.

After replacing: No reset: Hurom juicers have no reminder for this part.

How to change the filter in your Hurom H25

Watch the guide or follow the steps.

[HUROM H26] Plugging and Unplugging Silicone · Hurom (official)
  1. 1Switch the juicer off and unplug it.
  2. 2Turn the hopper anticlockwise to open it and lift it off the chamber (drum).
  3. 3Lift out the strainer together with the screw and the spinning brush (brush holder), then pull the screw out by its wing.
  4. 4Separate the old strainer from the spinning brush. Push the new strainer into the brush holder until it is fully seated.
  5. 5Put the assembly back in the chamber, turning it until the bump on the base drops into place, then refit the screw and close the hopper.
Every number this part goes by
Retail name:
HX251

Sellers list any of these; they are the same part.

About your H25

Hurom juicer, cold press juicer — Alpha. Its filter is the Ultem fine strainer for H26, H25 and HAA (HX251), part HX251.

Other filters the maker lists for this cold press juicer: Hurom Ultem coarse strainer for H26, H25 and HAA (HX252). Optional coarse strainer for thicker juice with more pulp.

Also in this cold press juicer:

Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.

Fits these 7 Hurom models
Common questions
Which filter fits the Hurom H25?
The Hurom H25 takes the Hurom Ultem fine strainer for H26, H25 and HAA (HX251).
Where can I buy the HX251 in Australia?
We track 1 Australian seller for the HX251; the lowest listed price when we last checked was A$49.95 at Hurom Australia. Prices are re-checked daily and dated on this page.
How do I fit the HX251 in a Hurom H25?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
Is there anything to reset afterwards?
No reset: Hurom juicers have no reminder for this part.

Something looks wrong with the H25 match? . Reports go to a person, not a bot.