The Hurom HAA takes the Hurom Ultem fine strainer for H26, H25 and HAA (HX251) as its filter; Australian sellers list it from A$49.95 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your cold press juicer
Hurom HAA
Cold press juicer
Confirmed against Hurom's listConfirmed against Hurom's own compatibility list
Not yours? Change
Takes the HX251 filter
Ultem fine strainer for H26, H25 and HAA (HX251) · check the code printed on your old filter before ordering.
Your cold press juicer
Cold press juicer
Confirmed against Hurom's listConfirmed against Hurom's own compatibility list
Takes the HX251
Filter · check the code on your old filter.
Other Hurom cold press juicers that take the HX251
GenuineGenuine Hurom
$49.95
Hurom Australia · 28 OctLowest genuine · Hurom Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Hurom. Compatible: another brand.Genuine is made by Hurom. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $49.95
Hurom Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this cold press juicer takes
- Hurom silicone brushes for H26, H25 and HAA (HX258)Open Hurom Australia$4.98 each · 2-pack $9.95
The silicone part. Separate from the filter.
- Hurom auger screw for H26, H25 and HAA (HX254)Open Hurom Australia$99.95
The auger. Separate from the filter.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Hurom Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is damaged or worn and juicing suffers; Hurom gives no set interval.
After replacing: No reset: Hurom juicers have no reminder for this part.
How to change the filter in your Hurom HAA
Watch the guide or follow the steps.
- 1Switch the juicer off and unplug it.
- 2Turn the hopper anticlockwise to open it and lift it off the chamber (drum).
- 3Lift out the strainer together with the screw and the spinning brush (brush holder), then pull the screw out by its wing.
- 4Separate the old strainer from the spinning brush. Push the new strainer into the brush holder until it is fully seated.
- 5Put the assembly back in the chamber, turning it until the bump on the base drops into place, then refit the screw and close the hopper.
Every number this part goes by
- Retail name:
- HX251
Sellers list any of these; they are the same part.
About your Hurom HAA
Hurom juicer, cold press juicer — Alpha. Its filter is the Ultem fine strainer for H26, H25 and HAA (HX251), part HX251.
Other filters the maker lists for this cold press juicer: Hurom Ultem coarse strainer for H26, H25 and HAA (HX252). Optional coarse strainer for thicker juice with more pulp.
Also in this cold press juicer: Hurom silicone brushes for H26, H25 and HAA (HX258), Hurom auger screw for H26, H25 and HAA (HX254).
Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.
Common questions
- Which filter fits the Hurom HAA?
- The Hurom HAA takes the Hurom Ultem fine strainer for H26, H25 and HAA (HX251).
- Where can I buy the HX251 in Australia?
- We track 1 Australian seller for the HX251; the lowest listed price when we last checked was A$49.95 at Hurom Australia. Prices are re-checked daily and dated on this page.
- How do I fit the HX251 in a Hurom HAA?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn or damaged filter, strainer or screw juices less and lets more pulp through into the juice.
- Is there anything to reset afterwards?
- No reset: Hurom juicers have no reminder for this part.
Something looks wrong with the HAA match? . Reports go to a person, not a bot.