FitMatch

The Kuvings MOTIV1 takes the Kuvings spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ) as its silicone part; Australian sellers list it from A$9.98 each as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your cold press juicer

Cold press juicer

Confirmed against Kuvings's list

Not yours? Change
SPARE-SSPPJ

Takes the SPARE-SSPPJ

Silicone part · check the code on your old part.

Other Kuvings cold press juicers that take the SPARE-SSPPJ

Genuine

$9.98 each

2-pack $19.95

Kuvings Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Kuvings. Compatible: another brand.

Lowest price · $9.98 each · 2-pack $19.95

Kuvings Australia. Every seller we track is listed below. Some links earn us a commission.

Open Kuvings Australia

This cold press juicer also takes an auger

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Kuvings AustraliaGenuine · checked 28 Oct$9.98 each2-pack $19.95Open
Open cheapest seller · $9.98 each · 2-pack $19.95

Opens Kuvings Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is torn, stretched or worn, or juice leaks; Kuvings gives no set interval.

After replacing: No reset: Kuvings juicers have no reminder for this part.

How to change the silicone part in your Kuvings MOTIV1

Watch the guide or follow the steps.

How to Assemble Your Kuvings Cold Press Juicer - Feeder Style Juicers · Kuvings Australia (official)
  1. 1Switch the juicer off and unplug it.
  2. 2Open the lid and lift out the juicing screw, then the strainer and rotation wiper.
  3. 3Pull the old silicone wings (brushes) out of the rotation wiper.
  4. 4Insert each new wing with the tail of the brush pointing down. Then pull the silicone ring out of the strainer and push the new one into the groove, wide side down.
  5. 5Refit the strainer into the wiper, place them in the bowl with the red dots lined up, refit the screw and close the lid.
Every number this part goes by
Retail name:
SPARE-SSPPJ

Sellers list any of these; they are the same part.

About your MOTIV1

Kuvings juicer, cold press juicer — MOTIV. Its silicone part is the spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ), part SPARE-SSPPJ.

Other silicone parts the maker lists for this cold press juicer: Kuvings silicone wing set for C and E series and EVO820 (SPARE-PRO-WINGSET). The silicone wings on their own (one set).

Also in this cold press juicer: Kuvings juicing screw for C and E series and EVO820 (SPARE-PRO-AUGER).

Where the model number is: The model is on the label under the motor base, and on the box. Unplug the juicer and take the bowl off before you turn the base over.

Fits these 7 Kuvings models
Common questions
Which silicone part fits the Kuvings MOTIV1?
The Kuvings MOTIV1 takes the Kuvings spare parts pack: silicone wings and strainer rings (SPARE-SSPPJ).
Where can I buy the SPARE-SSPPJ in Australia?
We track 1 Australian seller for the SPARE-SSPPJ; the lowest listed price when we last checked was A$9.98 at Kuvings Australia. Prices are re-checked daily and dated on this page.
How do I fit the SPARE-SSPPJ in a Kuvings MOTIV1?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn or stretched seal or wiper lets juice leak round the bowl or the strainer.
Is there anything to reset afterwards?
No reset: Kuvings juicers have no reminder for this part.

Something looks wrong with the MOTIV1 match? . Reports go to a person, not a bot.