The Ozito PXBSPMS-0182 takes the Ozito PXC 460mm lawn mower blade PXLMB-460 as its blade; replace it every 2 years. Fitment confirmed against the manufacturer's compatibility list.
Your lawn mower
Ozito PXBSPMS-0182
Lawn mower
Confirmed against Ozito's listConfirmed against Ozito's own compatibility list
Not yours? ChangeSave it · remind me every 2 years
Takes the PXLMB-460 blade
PXC 460mm lawn mower blade PXLMB-460 · replace every 2 years · check the code on your old part before ordering.
One 460 mm bar blade (PXLMB-460). Ozito says to replace it after 50 hours of mowing or 2 years.
Your lawn mower
Lawn mower
Confirmed against Ozito's listConfirmed against Ozito's own compatibility list
Takes the PXLMB-460
Blade · every 2 years · check the code on your old part.
One 460 mm bar blade (PXLMB-460). Ozito says to replace it after 50 hours of mowing or 2 years.
Other Ozito lawn mowers that take the PXLMB-460
GenuineGenuine Ozito
See seller
Bunnings · 28 OctBunnings · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Ozito. Compatible: another brand.Genuine is made by Ozito. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Not due yet?
Get a nudge when your blade is due — it's every 2 years. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the blade in your Ozito PXBSPMS-0182
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Make sure the blade has stopped, then remove the safety key, the batteries and the grass catcher. Wear gloves: the edges are sharp.
- 2Turn the mower over. Hold the blade firmly (a piece of timber helps) and loosen the blade bolt anticlockwise with a 13 mm socket.
- 3Remove the blade bolt, washer and blade.
- 4Place the new blade over the centre hole, lining up the lugs (on some models the lugs are shaped so the blade only fits one way).
- 5Refit the washer and bolt and tighten to about 25 Nm.
Every number this part goes by
- Retail name:
- PXLMB-460
- Retail name:
- PXLMB460
Sellers list any of these; they are the same part.
About your Ozito PXBSPMS-0182
Ozito lawn mower — PXC 36V (2 x 18V) 460mm brushless. Its blade is the PXC 460mm lawn mower blade PXLMB-460, part PXLMB-460, changed every 2 years.
Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.
Fits these 9 Ozito models
Ozito9 models
One 460 mm bar blade (PXLMB-460). Ozito says to replace it after 50 hours of mowing or 2 years.
Common questions
- Which blade fits the Ozito PXBSPMS-0182?
- The Ozito PXBSPMS-0182 takes the Ozito PXC 460mm lawn mower blade PXLMB-460. One 460 mm bar blade (PXLMB-460). Ozito says to replace it after 50 hours of mowing or 2 years.
- How often should I replace the blade in my Ozito PXBSPMS-0182?
- Every 2 years, or sooner if it looks worn.
- Where can I buy the PXLMB-460 in Australia?
- We link to 1 Australian seller for the PXLMB-460; the seller's page shows the current price.
- How do I fit the PXLMB-460 in an Ozito PXBSPMS-0182?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the PXBSPMS-0182 match? . Reports go to a person, not a bot.