How often should I change an Ozito blade?

Every 2 years for the PXC 460mm lawn mower blade PXLMB-460, the most common Ozito blade here. Each model page shows the interval for its own blade.

What happens if I don't change the blade?

A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.

Which blade (and on petrol mowers, which air filter and spark plug) each of the 21 Ozito lawn mowers sold in Australia takes.

Showing 21 of 21 Ozito models · grouped by part

Steps for the PXC 460mm lawn mower blade PXLMB-460 (PXLMB-460), the blade 9 Ozito models take. Change it every 2 years.

No clear video for this blade yet. The steps cover it.

1Make sure the blade has stopped, then remove the safety key, the batteries and the grass catcher. Wear gloves: the edges are sharp.
2Turn the mower over. Hold the blade firmly (a piece of timber helps) and loosen the blade bolt anticlockwise with a 13 mm socket.
3Remove the blade bolt, washer and blade.
4Place the new blade over the centre hole, lining up the lugs (on some models the lugs are shaped so the blade only fits one way).
5Refit the washer and bolt and tighten to about 25 Nm.

No reset needed.

One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.

How often should I change an Ozito blade?: Every 2 years for the PXC 460mm lawn mower blade PXLMB-460, the most common Ozito blade here. Each model page shows the interval for its own blade.
What happens if I don't change the blade?: A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset after changing the blade on an Ozito mower?: No reset needed.

Brand names describe compatibility only; FitMatch is independent of Ozito. Fitment sources are recorded on every model page.