FitMatch

The Sanli PCS125 takes the Sanli 40 cm (16") bar blade KSP-CB4 as its blade; Australian sellers list it from A$17.49 as of 31 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Sanli PCS125

Your lawn mower

Lawn mower

Confirmed against Sanli's list

KSP-CB4

Takes the KSP-CB4

Blade · check the code on your old part.

Takes one 40 cm bar blade: KSP-CB4.

Other Sanli lawn mowers that take the KSP-CB4

Genuine

$17.49

Jakmax · 31 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Sanli. Compatible: another brand.

Lowest price · $17.49

Jakmax. Every seller we track is listed below. Some links earn us a commission.

Open Jakmax

This lawn mower also takes a spark plug

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $17.49

Opens Jakmax in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it as soon as possible when it is damaged, worn or bent, Sanli says; check the blade and its bolts before and after each mow, and have it sharpened and balanced at least once a year by a service agent.

After replacing: No reset needed.

How to change the blade in your Sanli PCS125

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Stop the engine and disconnect the spark plug cap. Wear protective gloves when you handle the blades.
  2. 2Tilt the mower on its side with the air filter and carburettor side up.
  3. 3Hold the blade firmly in one hand and loosen the blade screw with a spanner or socket.
  4. 4Check that all the parts (blades, key, blade holder, screws and washers) are there, clean and in good condition, and fit the new blades with the cooling fins facing the engine.
  5. 5Tighten the screws, check that everything is in place and lined up, then tighten the fixing bolt very firmly while holding the blade.
Every number this part goes by
Retail name:
KSP-CB4
Retail name:
KSPCB4

Sellers list any of these; they are the same part.

About your PCS125

Sanli lawn mower — Bull Ant (July 2020 on). Its blade is the 40 cm (16") bar blade KSP-CB4, part KSP-CB4.

Also in this lawn mower: NGK BPR6ES spark plug (every 12 months). Sanli recommends NGK BPR6ES or Torch F6RTC for its mowers, with a gap of about 0.7 mm, and says to check it every 25 hours.

Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.

Fits these 6 Sanli models

BBJ300, BBP400, BIG350. Takes one bar blade: KSP-CB4.

The other 3 models. Takes one 40 cm bar blade: KSP-CB4.

Common questions
Which blade fits the Sanli PCS125?
The Sanli PCS125 takes the Sanli 40 cm (16") bar blade KSP-CB4. Takes one 40 cm bar blade: KSP-CB4.
Where can I buy the KSP-CB4 in Australia?
We track 2 Australian sellers for the KSP-CB4; the lowest listed price when we last checked was A$17.49 at Jakmax. Prices are re-checked daily and dated on this page.
How do I fit the KSP-CB4 in a Sanli PCS125?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset afterwards?
No reset needed.

Something looks wrong with the PCS125 match? . Reports go to a person, not a bot.