
Line trimmer line
Ryobi RLTS2 pre-cut trimmer line, 2.0 mm (5 lengths) for Reel-Easy heads
RLTS2
Fits 9 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Ryobi
See seller
Ryobi Australia · 28 OctRyobi Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Ryobi. Compatible: another brand.Genuine is made by Ryobi. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
How long it lasts
Replace it when the line wears down and no longer feeds with a tap of the bump knob.
After replacing: No reset needed.
How to change the RLTS2 trimmer line
Watch the guide or follow the steps.
- 1Remove the battery pack. Lay the trimmer on a level surface, motor side down and guard side up.
- 2Turn the bump knob until the line on its centre lines up with the arrows on the outer spool.
- 3Push one pre-cut 2.0 mm line (about 3 m) through the eyelet on one side of the head until it comes out of the other side, with equal lengths each side.
- 4Turn the bump knob with the Speedwinder (or by hand) to wind the line in, until about 12 cm sticks out each side.
- 5Refit the battery, start the trimmer and tap the bump knob on the ground to feed more line as you work.
Every number this part goes by
- Retail name:
- 0355545
- Retail name:
- RLTS2
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 9 Ryobi models
Common questions
- What does the RLTS2 fit?
- The Ryobi RLTS2 pre-cut trimmer line, 2.0 mm (5 lengths) for Reel-Easy heads fits 9 Ryobi models, including the R18HLTR38, R18XLTR30 and R36LTR10. Every one is listed on this page.
- Where can I buy the RLTS2 in Australia?
- We link to 1 Australian seller for the RLTS2; the seller's page shows the current price.
- How do I fit the RLTS2?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The trimmer stops cutting when the line runs out, and line of the wrong diameter jams the head or strains the motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the RLTS2 match? . Reports go to a person, not a bot.