The Hayward C3025 takes the Hayward SwimClear C3000-series cartridge CX580XRE (takes 4) as its cartridge; Australian sellers list it from A$118.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pool filter
Hayward C3025
Pool filter
Confirmed against Hayward's listConfirmed against Hayward's own compatibility list
Not yours? Change
Takes the CX580XRE cartridge
SwimClear C3000-series cartridge CX580XRE (takes 4) · check the code on your old part before ordering.
This filter takes 4 cartridges.
Your pool filter
Pool filter
Confirmed against Hayward's listConfirmed against Hayward's own compatibility list
Takes the CX580XRE
Cartridge · check the code on your old part.
This filter takes 4 cartridges.
Other Hayward pool filters and their cartridges
The CX580XRE fits the C3025 only. These Hayward models take a different cartridge:
GenuineGenuine Hayward
See seller
No genuine seller tracked yetNo genuine seller tracked yet
CompatibleCompatible option
$118.00
Heater and Spa Parts · 28 OctHeater and Spa Parts · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Hayward. Compatible: another brand.Genuine is made by Hayward. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $118.00
Heater and Spa Parts. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
3 sellers
Opens Heater and Spa Parts in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when cleaning no longer brings the pressure down; clean it when the pressure rises 0.5–0.7 bar (7–10 psi) above the starting pressure.
After replacing: No reset light. Hayward says to clean or replace the cartridge when the gauge rises 7–10 psi (0.5–0.7 bar) above the starting pressure.
How to change the cartridge in your Hayward C3025
Watch the guide or follow the steps.
- 1Shut off the pump, close the valves and open the air relief valve. Drain the filter.
- 2Release the clamp and lift off the filter head.
- 3Lift out the four cartridges and hose each one inside and out, or fit new ones.
- 4Refit the cartridges, the head and the clamp, then restart and bleed the air.
Every number this part goes by
- Retail name:
- CX580RE
- Retail name:
- CX580XRE
- Retail name:
- CX580XREPAK4
Sellers list any of these; they are the same part.
About your Hayward C3025
Hayward pool filter — SwimClear multi-element cartridge filter (325 sq ft). Its cartridge is the SwimClear C3000-series cartridge CX580XRE (takes 4), part CX580XRE.
Where the model number is: The model is on the label on the filter tank or under the lid (Zodiac CS150, Hayward C150S). On an above-ground pump it is on the pump's label or the box (Intex model 604 or item 28604, Bestway 58383); on an inflatable spa, on the box or the pump unit's label (Lay-Z-Spa Miami, Intex SB-H20). If the label has worn off, measure the old cartridge's length and diameter.
Fits this Hayward model
Hayward1 model
This filter takes 4 cartridges.
Common questions
- Which cartridge fits the Hayward C3025?
- The Hayward C3025 takes the Hayward SwimClear C3000-series cartridge CX580XRE (takes 4). This filter takes 4 cartridges.
- Where can I buy the CX580XRE in Australia?
- We track 3 Australian sellers for the CX580XRE; the lowest listed price when we last checked was A$118.00 at Heater and Spa Parts. Prices are re-checked daily and dated on this page.
- How do I fit the CX580XRE in a Hayward C3025?
- 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Hayward says to clean or replace the cartridge when the gauge rises 7–10 psi (0.5–0.7 bar) above the starting pressure.
Something looks wrong with the C3025 match? . Reports go to a person, not a bot.