The Intex 28602 takes the Intex Type H filter cartridge 29007 as its cartridge; Australian sellers list it from A$9.95 as of 29 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pool filter
Intex 28602
Pool filter
Confirmed against Intex's listConfirmed against Intex's own compatibility list
Not yours? Change
Takes the 29007 cartridge
Type H filter cartridge 29007 · check the code on your old part before ordering.
Your pool filter
Pool filter
Confirmed against Intex's listConfirmed against Intex's own compatibility list
Takes the 29007
Cartridge · check the code on your old part.
Other Intex pool filters and their cartridges
The 29007 fits the 28602 only. These Intex models take a different cartridge:
GenuineGenuine Intex
$9.95
Clark Rubber · 29 OctLowest genuine · Clark Rubber · checked 29 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Intex. Compatible: another brand.Genuine is made by Intex. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $9.95
Clark Rubber. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 4 listings from 3 sellers
AUD, before delivery. Each price shows when it was checked.
Genuine Intex
4 listings from 3 sellers
Opens Clark Rubber in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it at least every two weeks, Intex says; take it out and check it every week and hose it clean in between.
After replacing: No reset light. Follow the maker's replacement interval.
How to change the cartridge in your Intex 28602
Watch the guide or follow the steps.
- 1Turn the pump off and unplug the power cord.
- 2In the pool, unscrew the inlet nozzle and strainer grid and push the hat-like plugs into the strainer connectors so the pool does not drain.
- 3Turn the housing collar anticlockwise and lift off the threaded cover. Keep the cover seal.
- 4Lift out the cartridge and hose it clean, or fit a new one if it stays dirty. Intex says to replace it at least every 2 weeks.
- 5Refit the cartridge, seal and cover, and screw the collar back on clockwise.
- 6Open the air release valve, take out the plugs, let the air escape, close the valve, refit the nozzle and strainer grid, then turn the pump on.
Every number this part goes by
- Retail name:
- 29007
- Retail name:
- 29007E
- Retail name:
- Intex Type H
- Retail name:
- Type H
Sellers list any of these; they are the same part.
About your Intex 28602
Intex pool filter — Krystal Clear cartridge filter pump, 330 gal/h (1,250 L/h), model 602. Its cartridge is the Type H filter cartridge 29007, part 29007.
Where the model number is: The model is on the label on the filter tank or under the lid (Zodiac CS150, Hayward C150S). On an above-ground pump it is on the pump's label or the box (Intex model 604 or item 28604, Bestway 58383); on an inflatable spa, on the box or the pump unit's label (Lay-Z-Spa Miami, Intex SB-H20). If the label has worn off, measure the old cartridge's length and diameter.
Fits this Intex model
Intex1 model
Common questions
- Which cartridge fits the Intex 28602?
- The Intex 28602 takes the Intex Type H filter cartridge 29007.
- Where can I buy the 29007 in Australia?
- We track 3 Australian sellers for the 29007; the lowest listed price when we last checked was A$9.95 at Clark Rubber. Prices are re-checked daily and dated on this page.
- How do I fit the 29007 in an Intex 28602?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Follow the maker's replacement interval.
Something looks wrong with the 28602 match? . Reports go to a person, not a bot.