FitMatch

The Vortex Palladium takes the Vortex IKON / Palladium filter 336 x 125 mm (124756) as its cartridge; Australian sellers list it from A$59.95 as of 30 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Vortex Palladium

Your spa

Spa

Confirmed against Vortex's list

124756

Takes the 124756

Cartridge · check the code on your old part.

Filter 1 is the 336 x 125 mm 124756 on Palladium spas from June 2016, with the Purezone 127181 alongside.

Other Vortex spas that take the 124756

Genuine

$59.95

Spa World · 30 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Vortex. Compatible: another brand.

Lowest price · $59.95

Spa World. Every seller we track is listed below. Some links earn us a commission.

Open Spa World

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $59.95

Opens Spa World in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it will not come clean or is damaged; until then rinse it weekly and soak it in cartridge cleaner monthly, as the Vortex manual says.

After replacing: The Vortex manual describes no filter reminder; follow its cleaning schedule.

How to change the cartridge in your Vortex Palladium

Watch the guide or follow the steps.

Spa Filter Cleaning Guide: Maintain Crystal-Clear Water & Extend Filter Life! · Spa World (official)
  1. 1Switch the spa off at the isolating switch before you open the filter.
  2. 2Lift off the filter face or lid to reach the cartridge.
  3. 3Lift or unscrew the cartridge and take it out.
  4. 4Rinse the pleats with a hose, or fit a new cartridge.
  5. 5Refit the cartridge and the filter face, then switch the spa back on.
Every number this part goes by
Retail name:
124756
Retail name:
Vortex IKON filter

Sellers list any of these; they are the same part.

About your Palladium

Vortex spa — Vortex 10-person spa. Its cartridge is the IKON / Palladium filter 336 x 125 mm (124756), part 124756.

Other cartridges the maker lists for this spa:

Where the model number is: The model name (Neon, Mercury, Cerium) is on your purchase papers. The serial number plate is on the base pan near the corner to the right of the keypad; on Palladium, Titanium and swim spas it is on the cabinet panel near the touchpad. Spas made from June 2016 (January 2018 in New Zealand) have camlock filters, earlier ones threaded.

Fits these 2 Vortex models

Vortex2 models

IKON. There is no Purezone version.

Palladium. Filter 1 is the 336 x 125 mm 124756 on Palladium spas from June 2016, with the Purezone 127181 alongside.

Common questions
Which cartridge fits the Vortex Palladium?
The Vortex Palladium takes the Vortex IKON / Palladium filter 336 x 125 mm (124756). Filter 1 is the 336 x 125 mm 124756 on Palladium spas from June 2016, with the Purezone 127181 alongside.
Where can I buy the 124756 in Australia?
We track 1 Australian seller for the 124756; the lowest listed price when we last checked was A$59.95 at Spa World. Prices are re-checked daily and dated on this page.
How do I fit the 124756 in a Vortex Palladium?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
How do I reset the reminder?
The Vortex manual describes no filter reminder; follow its cleaning schedule.

Something looks wrong with the Palladium match? . Reports go to a person, not a bot.