The Zodiac CS150 takes the Zodiac (Jandy) CS150 cartridge element R0462300 as its cartridge; Australian sellers list it from A$123.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your pool filter
Zodiac CS150
Pool filter
Confirmed against Zodiac's listConfirmed against Zodiac's own compatibility list
Not yours? Change
Takes the R0462300 cartridge
(Jandy) CS150 cartridge element R0462300 · check the code on your old part before ordering.

Your pool filter
Pool filter
Confirmed against Zodiac's listConfirmed against Zodiac's own compatibility list

Takes the R0462300
Cartridge · check the code on your old part.
Other Zodiac pool filters and their cartridges
The R0462300 fits the CS150 only. These Zodiac models take a different cartridge:
GenuineGenuine Zodiac
$417.00
Heater and Spa Parts · 28 OctLowest genuine · Heater and Spa Parts · checked 28 Oct
CompatibleCompatible option
$123.00
Heater and Spa Parts · 28 OctHeater and Spa Parts · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Zodiac. Compatible: another brand.Genuine is made by Zodiac. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $123.00
Heater and Spa Parts. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 listings from 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 sellers
Opens Heater and Spa Parts in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it has holes, tears or worn pleats; clean it when the pressure rises about 70 kPa (10 psi).
After replacing: No reset light. Zodiac says to clean the cartridge when the gauge rises 10 psi (about 70 kPa) above the clean-cartridge reading.
How to change the cartridge in your Zodiac CS150
Watch the guide or follow the steps.
- 1Turn the pump off at the circuit breaker. Open the air release valve on top of the filter and close any isolation valves.
- 2Open the drain at the base of the tank and close it once the tank is empty.
- 3Push the locking tab and turn the locking ring anticlockwise, then lift off the top of the filter.
- 4Lift the element off the tank bottom. Hose each pleat clean, or fit a new element.
- 5Check the tank O-ring, coat it with silicone lubricant, refit the top and turn the ring clockwise until it engages the stop tab. Restart and bleed the air.
Every number this part goes by
- Retail name:
- C-8414
- Retail name:
- R0462300
- Retail name:
- WR0462300
Sellers list any of these; they are the same part.
About your Zodiac CS150

Zodiac pool filter — CS cartridge filter (Jandy). Its cartridge is the (Jandy) CS150 cartridge element R0462300, part R0462300.
Where the model number is: The model is on the label on the filter tank or under the lid (Zodiac CS150, Hayward C150S). On an above-ground pump it is on the pump's label or the box (Intex model 604 or item 28604, Bestway 58383); on an inflatable spa, on the box or the pump unit's label (Lay-Z-Spa Miami, Intex SB-H20). If the label has worn off, measure the old cartridge's length and diameter.
Fits this Zodiac model
Zodiac1 model
Common questions
- Which cartridge fits the Zodiac CS150?
- The Zodiac CS150 takes the Zodiac (Jandy) CS150 cartridge element R0462300.
- Where can I buy the R0462300 in Australia?
- We track 2 Australian sellers for the R0462300; the lowest listed price when we last checked was A$123.00 at Heater and Spa Parts. Prices are re-checked daily and dated on this page.
- How do I fit the R0462300 in a Zodiac CS150?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Zodiac says to clean the cartridge when the gauge rises 10 psi (about 70 kPa) above the clean-cartridge reading.
Something looks wrong with the CS150 match? . Reports go to a person, not a bot.