FitMatch

The Zodiac CS250 takes the Zodiac (Jandy) CS250 cartridge element R0462500 as its cartridge; Australian sellers list it from A$208.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Zodiac CS250

Your pool filter

Pool filter

Confirmed against Zodiac's list

R0462500

Takes the R0462500

Cartridge · check the code on your old part.

Other Zodiac pool filters and their cartridges

The R0462500 fits the CS250 only. These Zodiac models take a different cartridge:

Genuine

$552.00

Heater and Spa Parts · 28 Oct

Compatible

$208.00

Heater and Spa Parts · 28 Oct

Check seller

Genuine: made by Zodiac. Compatible: another brand.

Lowest compatible · $208.00

Heater and Spa Parts. Compare with genuine below. Some links earn us a commission.

Open Heater and Spa Parts

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $208.00

Opens Heater and Spa Parts in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it has holes, tears or worn pleats; clean it when the pressure rises about 70 kPa (10 psi).

After replacing: No reset light. Zodiac says to clean the cartridge when the gauge rises 10 psi (about 70 kPa) above the clean-cartridge reading.

How to change the cartridge in your Zodiac CS250

Watch the guide or follow the steps.

Replacing the Filter Element on a Jandy CS Filter · ZodiacAustralia (official)
  1. 1Turn the pump off at the circuit breaker. Open the air release valve on top of the filter and close any isolation valves.
  2. 2Open the drain at the base of the tank and close it once the tank is empty.
  3. 3Push the locking tab and turn the locking ring anticlockwise, then lift off the top of the filter.
  4. 4Lift the element off the tank bottom. Hose each pleat clean, or fit a new element.
  5. 5Check the tank O-ring, coat it with silicone lubricant, refit the top and turn the ring clockwise until it engages the stop tab. Restart and bleed the air.
Every number this part goes by
Retail name:
C-8425
Retail name:
R0462500
Retail name:
WR0462500

Sellers list any of these; they are the same part.

About your CS250

Zodiac pool filter — CS cartridge filter (Jandy). Its cartridge is the (Jandy) CS250 cartridge element R0462500, part R0462500.

Where the model number is: The model is on the label on the filter tank or under the lid (Zodiac CS150, Hayward C150S). On an above-ground pump it is on the pump's label or the box (Intex model 604 or item 28604, Bestway 58383); on an inflatable spa, on the box or the pump unit's label (Lay-Z-Spa Miami, Intex SB-H20). If the label has worn off, measure the old cartridge's length and diameter.

Fits this Zodiac model

Zodiac1 model

Common questions
Which cartridge fits the Zodiac CS250?
The Zodiac CS250 takes the Zodiac (Jandy) CS250 cartridge element R0462500.
Where can I buy the R0462500 in Australia?
We track 2 Australian sellers for the R0462500; the lowest listed price when we last checked was A$208.00 at Heater and Spa Parts. Prices are re-checked daily and dated on this page.
How do I fit the R0462500 in a Zodiac CS250?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
Is there anything to reset afterwards?
No reset light. Zodiac says to clean the cartridge when the gauge rises 10 psi (about 70 kPa) above the clean-cartridge reading.

Something looks wrong with the CS250 match? . Reports go to a person, not a bot.