The Tefal Clipso Control 10L takes the Tefal Clipso seal, 8 and 10 L (part 792237) as its sealing ring; replace it every 12 months; Australian sellers list it from A$18.50 as of 31 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your pressure cooker
Tefal Clipso Control 10L
Stovetop pressure cooker
Confirmed against Tefal's listConfirmed against Tefal's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the 792237 sealing ring
Clipso seal, 8 and 10 L · replace every 12 months · check the code on your old part before ordering.
Your pressure cooker
Stovetop pressure cooker
Confirmed against Tefal's listConfirmed against Tefal's own compatibility list
Takes the 792237
Sealing ring · every 12 months · check the code on your old part.
Other Tefal pressure cookers that take the 792237
GenuineGenuine Tefal
$18.50
Tefal Australia · 31 OctLowest genuine · Tefal Australia · checked 31 Oct
We list the maker's own sealing rings only: Instant Brands, Fissler and Ninja warn that other rings may not seal safely.
Lowest price · $18.50
Tefal Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Tefal Australia in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your sealing ring is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the sealing ring in your Tefal Clipso Control 10L
Watch the guide or follow the steps.
- 1Let the cooker cool, make sure there is no pressure left and open the lid.
- 2Turn the lid upside down and pull the old seal out of its groove.
- 3Clean the groove with a sponge and washing-up liquid.
- 4Fit the new seal under the lid. On Secure models make sure it sits under each notch; on Clipso, Acticook and Nutricook models put the side marked 'lid side' against the lid and clip it evenly under the holding device.
- 5Close the lid and check it locks. If steam escapes round the lid, check the seal is seated evenly.
Every number this part goes by
- Retail name:
- 4046958
- Retail name:
- 4135767
- Retail name:
- 4136258
- Retail name:
- 792237
- Retail name:
- SS794417
- Retail name:
- Tefal Clipso 10L seal
- Retail name:
- Tefal Clipso 8L seal
Sellers list any of these; they are the same part.
About your Tefal Clipso Control 10L
Tefal pressure cooker, stovetop pressure cooker — Clipso. Its sealing ring is the Clipso seal, 8 and 10 L, part 792237, changed every 12 months.
Where the model number is: The model and capacity are on the rating label under the base or on the back of the cooker (Instant Pot Duo, Breville BPR700). On a stovetop pressure pot they are stamped on the base. Let the cooker cool, and unplug an electric one, first.
Fits these 8 Tefal models
Common questions
- Which sealing ring fits the Tefal Clipso Control 10L?
- The Tefal Clipso Control 10L takes the Tefal Clipso seal, 8 and 10 L (part 792237).
- How often should I replace the sealing ring in my Tefal Clipso Control 10L?
- Every 12 months, or sooner if it looks worn.
- Where can I buy the 792237 in Australia?
- We track 2 Australian sellers for the 792237; the lowest listed price when we last checked was A$18.50 at Tefal Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 792237 in a Tefal Clipso Control 10L?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.
- Is there anything to reset afterwards?
- No reset: the maker's manual describes no ring reminder.
Something looks wrong with the Clipso Control 10L match? . Reports go to a person, not a bot.