How often should I change a Tefal sealing ring?

Every 12 months for the Clipso seal, 4 to 7 L, 220 mm (792350), the most common Tefal sealing ring here. Each model page shows the interval for its own sealing ring.

What happens if I don't change the sealing ring?

A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.

Tefal pressure cooker sealing rings

Which sealing ring each of the 39 Tefal pressure cookers sold in Australia takes, with dated prices from 2 Australian sellers.

Showing 21 of 39 Tefal models · grouped by part

Clipso seal, 8 and 10 Ltakes 792237

Clipso seal, 4 to 7 L, 220 mmtakes 792350

Acticook and Clipso One seal, 8 and 10 Ltakes X1010003

Clipso and Acticook seal, 4.5 to 6 L, 220 mmtakes X1010004

Acticook 6Ltakes X1010004 · from $34.95View sealing ring

Loading more models…

How to change the sealing ring in your Tefal pressure cooker

Steps for the Clipso seal, 4 to 7 L, 220 mm (792350), the sealing ring 10 Tefal models take. Change it every 12 months.

How to change the gasket of your pressure cooker? | Tefal · Tefal International (official)

1Let the cooker cool, make sure there is no pressure left and open the lid.
2Turn the lid upside down and pull the old seal out of its groove.
3Clean the groove with a sponge and washing-up liquid.
4Fit the new seal under the lid. On Secure models make sure it sits under each notch; on Clipso, Acticook and Nutricook models put the side marked 'lid side' against the lid and clip it evenly under the holding device.
5Close the lid and check it locks. If steam escapes round the lid, check the seal is seated evenly.

Different steps for All-in-One CY505 lid seal

After fitting the ring

No reset: the maker's manual describes no ring reminder.

Get a reminder when your Tefal sealing ring is due

One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.

Common questions

How often should I change a Tefal sealing ring?: Every 12 months for the Clipso seal, 4 to 7 L, 220 mm (792350), the most common Tefal sealing ring here. Each model page shows the interval for its own sealing ring.
What happens if I don't change the sealing ring?: A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.
Is there anything to check after changing the sealing ring on a Tefal pressure cooker?: No reset: the maker's manual describes no ring reminder.

All 39 Tefal pressure cookers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Tefal. Fitment sources are recorded on every model page.