FitMatch

The Tefal Clipso Easy 6L takes the Tefal Clipso seal, 4 to 7 L, 220 mm (part 792350) as its sealing ring; replace it every 12 months; Australian sellers list it from A$30.87 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your pressure cooker

Stovetop pressure cooker

Confirmed against Tefal's list

Not yours? ChangeSave it · remind me
792350

Takes the 792350

Sealing ring · every 12 months · check the code on your old part.

Other Tefal pressure cookers that take the 792350

Genuine

$30.87

Amazon AU · 28 Oct

We list the maker's own sealing rings only: Instant Brands, Fissler and Ninja warn that other rings may not seal safely.

Lowest price · $30.87

Amazon AU. Every seller we track is listed below. Some links earn us a commission.

Open Amazon AU

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Amazon AUGenuine · checked 28 Oct$30.87Open
Tefal AustraliaGenuine · checked 31 Oct$36.99Open
Amazon AUGenuine · checked 28 Oct$38.25Open
Open cheapest seller · $30.87

Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your sealing ring is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the sealing ring in your Tefal Clipso Easy 6L

Watch the guide or follow the steps.

How to change the gasket of your pressure cooker? | Tefal · Tefal International (official)
  1. 1Let the cooker cool, make sure there is no pressure left and open the lid.
  2. 2Turn the lid upside down and pull the old seal out of its groove.
  3. 3Clean the groove with a sponge and washing-up liquid.
  4. 4Fit the new seal under the lid. On Secure models make sure it sits under each notch; on Clipso, Acticook and Nutricook models put the side marked 'lid side' against the lid and clip it evenly under the holding device.
  5. 5Close the lid and check it locks. If steam escapes round the lid, check the seal is seated evenly.
Every number this part goes by
Retail name:
792350
Retail name:
793145
Retail name:
7931450
Retail name:
Tefal Clipso 4.5L seal
Retail name:
Tefal Clipso Control seal

Sellers list any of these; they are the same part.

About your Clipso Easy 6L

Tefal pressure cooker, stovetop pressure cooker — Clipso. Its sealing ring is the Clipso seal, 4 to 7 L, 220 mm, part 792350, changed every 12 months.

Where the model number is: The model and capacity are on the rating label under the base or on the back of the cooker (Instant Pot Duo, Breville BPR700). On a stovetop pressure pot they are stamped on the base. Let the cooker cool, and unplug an electric one, first.

Fits these 10 Tefal models

Clipso 4.5L, Clipso 6L. Tefal also lists seal 792350 for Clipso 4 to 7 L. Match the code moulded on your old seal: 4135396 is X1010004.

Common questions
Which sealing ring fits the Tefal Clipso Easy 6L?
The Tefal Clipso Easy 6L takes the Tefal Clipso seal, 4 to 7 L, 220 mm (part 792350).
How often should I replace the sealing ring in my Tefal Clipso Easy 6L?
Every 12 months, or sooner if it looks worn.
Where can I buy the 792350 in Australia?
We track 2 Australian sellers for the 792350; the lowest listed price when we last checked was A$30.87 at Amazon AU. Prices are re-checked daily and dated on this page.
How do I fit the 792350 in a Tefal Clipso Easy 6L?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.
Is there anything to reset afterwards?
No reset: the maker's manual describes no ring reminder.

Something looks wrong with the Clipso Easy 6L match? . Reports go to a person, not a bot.